Pivot Applicator Type 3014 / 3016 - 1 Pages

  1. P. 1

Catalogue excerpts

Pivot Applicator Type 3014 / 3016 Labels can be applied from top, backside, frontside and from the side. The tamp pad is designed according to the label size. Labels can be applied with tamp pad, with even, spring forced or roll on pad. Technical data Label Handling Label Width mm Tamp pad Hermes+4 Type 3014 Hermes+6 Type 3016 Installation position upright – sideways – over head Cycle Time1) approx. cycles/min. Calculated based on 200 mm pivot arm length / smallest label height / print speed 100 mm/s. The pivot arm length is defined as achievable label position under 90° arm position (lower edge label format) measured from the base area of Hermes+. All specifications about delivery, design and technical data are given to the best of our current knowledge and are subject to change without prior notice. For more information go to www.cab.de cab-Produkttechnik GmbH & Co KG Wilhelm-Schickard-Str. 14 76131 Karlsruhe / Germany www.cab.de info@cab.de

 Open the catalogue to page 1

All cab Produkttechnik catalogues and technical brochures

  1. MACH1/MACH2

    4 Pages

    En
  2. MACH4

    13 Pages

    En
  3. Ribbons

    7 Pages

    En
  4. cablabel S3

    12 Pages

    En
  5. Label Marker EN

    4 Pages

    En
  6. Cablabel R2+

    2 Pages

    En
  7. PX Print module

    13 Pages

    En
  8. Hermes+

    20 Pages

    En
  9. EOS1 and EOS4

    12 Pages

    En
  10. e4 label printer

    4 Pages

    En

Archived catalogues