Vacuum Belt Applicator Type 5314 / 5316 - 1 Pages

  1. P. 1

Catalogue excerpts

Vacuum Belt Applicator Type 5314 / 5316 The vacuum belt applicator 5314/5316 is used to apply labels on products in motion. Labels can be applied from top, bottom and from the side. The vacuum belt applicator is preferably used for applying large labels and is operating regardless of the product‘s transport speed. Labels are printed and dispensed, belt-conveyed to the end of the belt conveyor and applied on a defined position on the product via sensor signal from the product conveyor. Technical data Vacuum belt applicator type 5314 Hermes+ 4 Vacuum belt applicator type 5316 Hermes+ 6 50 up to 400 in steps of 50 (programmable via J-Script) Length belt conveyor mm Labeling cycles / min. 200, 300, 500 max. 60 (depending on the size of the label and length of belt) All specifications about delivery, design and technical data are given to the best of our current knowledge and are subject to change without prior notice. For more information please refer to www.cab.de cab-Produkttechnik GmbH & Co KG Wilhelm-Schickard-Str. 14 76131 Karlsruhe / Germany www.cab.de info@cab.de Speed belt conveyor mm/s

 Open the catalogue to page 1

All cab Produkttechnik catalogues and technical brochures

  1. MACH1/MACH2

    4 Pages

    En
  2. MACH4

    13 Pages

    En
  3. Ribbons

    7 Pages

    En
  4. cablabel S3

    12 Pages

    En
  5. Label Marker EN

    4 Pages

    En
  6. Cablabel R2+

    2 Pages

    En
  7. PX Print module

    13 Pages

    En
  8. Hermes+

    20 Pages

    En
  9. EOS1 and EOS4

    12 Pages

    En
  10. e4 label printer

    4 Pages

    En

Archived catalogues