• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Daikin Altherma Flex Type - 32 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

  11. P. 20

  12. P. 30

Catalogue excerpts

DAIKIN ALTHERMA FLEX TYPE

 Open the catalogue to page 1

DAIKIN ALTHERMA FLEX TYPE: COOLING SYSTEM

 Open the catalogue to page 2

3 2 >17 18 >40 For the last 50 years, we have been the leading innovator in the heat pump industry. Because of this constant focus on innovation, we were the first to deliver Total Climate Control that respects the environment, is highly energy efficient and cost effective. The Daikin Altherma Flex Type range is the direct result of those years of research, innovation and continuous quality improvement. Always at the leading edge of climate control, we spend our time listening to what our customers want and then delivering tomorrow’s technology today. The Daikin Altherma Flex Type range is a mix...

 Open the catalogue to page 3

EFFICIENT ENERGY Efficient climate control for apartment buildings 6 Two Daikin technologies combined 8 Daikin heat pump convector 10 More benefits of advanced design 11 Daikin Altherma Flex Type: a typical installation 12 Daikin Altherma Flex Type: the flexible heating solution 14

 Open the catalogue to page 4

Providing total climate control in an apartment building or in collective housing presents a particular challenge because a large number of rooms simultaneously need heating or cooling. Daikin Altherma Flex Type is designed with this challenge in mind. Each outdoor unit can be linked to up to ten indoor units, with each indoor unit being individually controlled, to make sure the perfect temperature is maintained at all times. In addition, by making optimal use of VRV®, cascade technology and heat pump technologies, the system efficiently generates hot water in both heating and cooling modes.

 Open the catalogue to page 5

6 Efficient climate control for apartment buildings and collective housing Energy efficient heat pump technolgy Modular system Daikin Altherma Flex Type is today’s answer to current and future issues of increasing energy costs and unacceptable high environmental impact associated with conventional heating systems. With Daikin Altherma Flex Type, 2/3 of the generated heat comes from the air, which is recognised as a renewable energy source that is free of charge! Daikin Altherma Flex Type achieves a typical seasonal COP of 3 in the moderate Western and central European climate. Compared to an oil...

 Open the catalogue to page 6

7 Concept description Outdoor One or more indoor and outdoor units 1 1 Hot water 2 2 Heating 3 3 Cooling Heating/Cooling = One or more outdoor units + several indoor units >>  a modular system Modular system Indoor installation Outdoor unit 1 apartment 6kW 5kW 9kW 11kW 14kW 8kW Domestic hot water tank Indoor unit Total building 16kW 22kW 20kW 1P, 230V + 3P, 400V 45kW 40kW Install separate outdoor units to reach higher capacities (Separate systems: the outdoor units are not connected to each other) Note: Heating capacities 7°C ambient temperature, Cooling capacities 35°C ambient temperature

 Open the catalogue to page 7

8 Two Daikin technologies combined Indoor unit: Daikin Altherma cascade technology Space heating Hot water heating Daikin Altherma Flex Type uses two refrigerant cycles, R-410A and R-134a, to heat the water circuit. The purpose of a cascade system is to attain or work with pressures and temperatures which cannot be reached by using only one refrigerant cycle. The aim is to get the best characteristics out of the two active cycles. The R-410A refrigerant circuit has excellent characteristics with respect to low evaporating temperatures, while the R-134a circuit has excellent characteristics for...

 Open the catalogue to page 8

OUTDOOR UNIT: DAIKIN VRV® TECHNOLOGY Modular flexibility Daikin Altherma Flex Type makes use of Daikin's renowned VRV8 technology. A combination of Proportional Integral Derivative controlled compressors and electronic expansion valves in the outdoor unit continuously adjusts the circulating refrigerant volume in response to load variations in the connected indoor units. The VRV8 technology allows multiple indoor units to be connected to a single outdoor unit and the indoor units to operate independently of each other, assuring total flexibility. Each apartment retains control of its own heating,...

 Open the catalogue to page 9

DAIKIN HEAT PUMP THE OPTIMAL HEAT EMITTER FOR APARTMENTS The Daikin heat pump convector operates at typical water temperatures of 45°C, which can be efficiently produced thanks to Daikin Altherma Flex Type cascade The heat pump convector is therefore the ideal heat emitter for apartment applications, providing high comfort levels: > Small dimensions compared to low temperature radiators: width is reduced with 2/3 > Low sound level down to 19dB(A), ideal heating and cooling operation > High-capacity cooling with water temperatures down to 6° C Heating/Cooling operation living room bedroom 1 bedroom...

 Open the catalogue to page 10

11 More benefits of advanced design Modular design The modular design enables flexible and easy installation - this reduces the costs and makes maintenance easier. Small footprint The indoor units can be stacked or set adjacent to each other. This ensures the units to fit into available small spaces so that they do not impinge on the living area. Silent operation Advanced materials and designs allow all the moving parts to operate as silent as possible, thus ensuring that the climate control system is barely audible. Individual control The latest integrated control technologies allow the temperature...

 Open the catalogue to page 11

12 Daikin Altherma Flex type: a typical RESIDENTIAL installation Description: Location: Ostend, Belgium Number of floors: 8 Floor area for one apartment: 115m2 Construction year: 2008 Design condition in winter: -8°C Heat emitters: Daikin heat pump convectors Outdoor unit: EMRQ16AY1 Indoor units: 7x EKHVMYD50A

 Open the catalogue to page 12

Theoretical calculation Define design temperature 2. Define heat loads for each apartment and the appropriate indoor and outdoor units: D Heating capacity belowTa -15°C not garanteed Tdes.gn = -8°C Required heating capacity = 32.5kW Selected outdoor unit= 16HP Simulation software Daikin Altherma Flex Type simulation software allows dimensioning of a Daikin Altherma system in only a few steps. The simulation software automatically presents all the specifications required for dimensioning the whole system (in a clear report). > Selection of indoor units, hot water tank and options > Selection of...

 Open the catalogue to page 13

All Daikin Europe catalogues and technical brochures

  1. Wall mounted units

    24 Pages

    En
  2. EWAD-C Family

    6 Pages

    En
  3. EWAD-C-PS/PL

    2 Pages

    En
  4. Flexi type unit

    2 Pages

    En
  5. EKHVMRD-AB

    1 Pages

    En
  6. EWAD~C

    6 Pages

    En
  7. VRV Catalogue

    186 Pages

    En
  8. FTXG-JA

    24 Pages

    En