Selectra ProS
2Pages

{{requestButtons}}

Catalog excerpts

Selectra ProS - 1

Specifications REAGENT AND SAMPLE SYSTEM • One rotor combining both sample and reagent positions; • Inner rotor ring: - refrigerated reagent positions 30 for 10 ml, 25 ml and 50 ml reagent bottles; - Cooled to 10°C +/-2°C at normal laboratory conditions; - All reagent positions can be assigned as R1, R2 and R3; • Outer rotor ring: - 25 barcode readable positions; - All positions fit 13x75 mm primary and secondary tubes and pediatric cups; - All positions can be used for Calibrators, Controls, Normal, Pediatric and STAT samples. Pipetting system • 1000 μl Reagent syringe: - R1 volume 110 - 400 μl; - R2 volume 0 - 180 μl; - R3 volume 0 - 180 μl; - Programmable in 1 μl steps; • 100 μl Sample syringe; - Sample volume 1 - 30 μl; - Programmable in 0.1 μl steps. • Programmable dilution ratios 1:5 up to 1:200 in one step increments with 3 possible diluents; • Pre-heated probe with level detection, collision protection and integrated mixer. CUVETTE ROTOR • Cost effective, semi-disposable cuvette rotor with 48 cuvettes, path length 7mm; • >10.000 tests per rotor; • Typical reagent consumption 250 μl per test; • Measuring temperature 37˚C, controlled by Peltier elements. LIGHT SOURCE • Quartz-Iodine lamp 12V-20W. WAVELENGTH RANGE • 340 - 800 nm; • Optical unit with 8 position filter wheel; • Automatic wavelength selection; • 340, 405, 505, 546, 578, 620, 660, 700 nm standard installed; • Other wavelenghts available on request. PHOTOMETRIC RANGE • -0.1 to 3.0 Absorbance; • Resolution 0.001 Abs. ANALYTICAL MODES (SINGLE, DUAL AND TRIPLE REAGENT SYSTEM) • Kinetic measurement with linearity check; • Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction; • Two point measurement; with or without slope blank; • Graphic plot of all measuring points; • Predilution and automatic reflex dilution as needed; • Non-linear calibration curves; • Prozone check for immunology tests; • Cut-off declaration; • Calculated tests. QUALITY CONTROL • Up to 15 different controls can be defined, 3 per test; • Westgard rules; • Levey-Jennings plots; • Quality control statistics. Water Consumption • ~950 mL per hour max, continuous operation. STANDARDS and regulations • CE-IVD; • CB; • FDA; • UL. DIMENSIONS (BenchTop, self Contained Unit) • 0cm (36in) x 75cm (30in) x 60cm (24in) 9 (W x H x D); • Weight: 75 kg (165 lbs.). About ELITech Clinical Systems… Interface • tate of the art Host-Query interface S available; • Host: RS232 or Ethernet (TCP/IP) through LIS-2A protocol. ELITech Clinical Systems is a global leader in BenchTop Chemistry Systems, with over 15,000 Chemistry Systems delivered. Our mission is to enable better medical decisions by bringing high-value diagnostic solutions and services to laboratories that are closer to the patient (proximity laboratories). ELITech Clinical Systems leadership originates from our ability to continuously provide differentiated products and services focused to meet the needs of proximity laboratories. ELITech Clinical Systems markets the Selectra Pro Series, designed to deliver trouble-free results laboratories can trust. ENVIRONMENTAL CONDITIONS • Temperature: 15 – 32 °C (59 – 90 °F); • Humidity: 15 – 85% RH; • Altitude: up to 2000 m; • Plumbing: No dedicated system water or drain required; • Electrical: - Voltage: 100 – 240 Vac; - Frequency: 50 – 60 Hz; - Power (max): 400VA. Integrated PC • Touch screen navigation; • Operating System: Windows™ Embedded. Robust, Always gets the job done OPTIONS BAR CODE READER* • Hand held CCD bar code reader used for reagent identification and automated programming of assays, controls, and calibrators. Best in class operator interface, easy to train, laboratories can trust new Right Results, On Time with mistake Designedand error proofing reducing capabilities Best vendor services, application & lab operations support Management of difficult samples Cost effective, minimizes labor, maintenance & operate & maintain Proven methodologies, referenced and traceable waste to industry standards The Selectra Pro Series builds on the established robustness and reliability of the current Selectra systems, resulting from decades of proven experience in the design and manufacture of award winning BenchTop laboratory products. Together with a dedicated range of ready-to-use reagents from ELITech Clinical Systems, the Selectra Pro Series provides an ideal chemistry solution for laboratories that are closer to the patient. Over the past decades, the ELITech Group Companies have established a solid distribution network that operates world-wide. Thousands of customers have experienced the quality, convenience and reliability of ELITech products. Local support is provided by dedicated and well trained sales and service organizations. PRINTER • Printer supported by MS Windows™. Selectra ProS™ is a trademark of BV Selectra ProM™ is a trademark of Vital ScientificVital Scientific BV Windows™ is a trademark of Microsoft Windows™ is a trademark of Microsoft TxBCardio™ is a trademark of Corgenix Simplifies lab operations & reduces error Support you can count on Positive sample identification* • Positive Sample Identification (PSID) via integrated barcode reader. Reads all popular formats including Codes 39, 128, 93, CODABAR, and Interleaved 2/5. * Included with System in North America Trouble-Free Operations with True workhorsereliability proven system Dry ISE Module* • Patented Solid State Electrode Technology; • Indirect Measurement; • Dilution 1:14; • Measures Sodium, Potassium, Chloride and CO2. PROACTIVE MAINTENANCE KIT • Complete parts kit for annual preventive maintenance. Delivering Trouble-Free Results Laboratories can Trust Part nr: ECS 6003-500-490-2011/00EN THROUGHPUT • Typically 140 tests / hour; • Up to 266 ISE tests / hour. Delivering trouble-free results S E L E C T R A PRO CHEMISTRY system Distributor contact information: Content of this document is subject to change without prior notification Belgium Brazil France Italy T: + 32 9 2820 531 T: + 55 27 3025 1415 T: + 33 4 83 36 10 82 T: + 39 02 48 40 35 42 Middle East & Africa Serbia Switzerland The Netherlands T: + 971 4 375 2744 T: + 381 11 2467119 T: + 41 26 663 86 60 T: + 31 313 430 574 UK T: + 44 1442 869320 United States T: + 1 855 354 8324 Headquarters T: + 33 1 41 45 07 13 www.elitechgroup.com info@elitechgroup.com S

Open the catalog to page 1

All ELITech Group catalogs and technical brochures

  1. ESBL ELITe

    2 Pages

  2. ELITe MGB®

    2 Pages

  3. Envoy 500+

    4 Pages

  4. Microlab 400

    2 Pages

  5. ENVOY-500

    4 Pages

  6. chlorochek

    4 Pages

  7. ELITe GALAXY

    2 Pages

  8. NANODUCT

    4 Pages

  9. ELIchrom

    2 Pages

  10. ELITe STAR

    2 Pages

  11. Flexor EL150

    2 Pages

  12. Flexor EL80

    2 Pages

Archived catalogs