NDC - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

CO2 REMOVAL AIR DRYER NDC SERIES The CO2 adsorption dryers purifier compressed air to deliver a continuous supply of clean, dry (-70 °C pdp) and CO2 free (<1 ppm) purge gas. CO2 adsorption dryers replace high pressure oxygen or nitrogen gas cylinders and are ideal for numerous applications including FT-IR (Fourier transform infrared) purge, TOC purge, NMR, GC flame gas and laser purging. The dryer design has been developed with the laboratory environment in mind – the unit can easily be wall mounted to save valuable bench space. Using proven pressure swing adsorption (PSA) technology, the units feature automatic regeneration and integral pre and post filtration providing totally clean, dry air with a CO2 level of <1ppm. F-DGS products are designed and manufactured within an ISO9001 quality system and are CE marked. Benefits and Savings Increased laboratory efficiency -Reduce signal to noise ratio improves instrument performance -Protects sensitive optics and air bearings from moisture. -Tested and approved by most TOC and FT-IR instruments manufacturers. Reliability - Condensate collected in bottom of dryer column is vented with every dryer cycle - Removal of condensate by timed solenoid valve improves reliability - Small amounts of condensate are exhausted frequently, eliminating the risk associated with float drain malfunction - Purge adjustment screws are located after fine dust filtration, eliminating the possibility of contamination and loss of performance Reduced energy - Probably the most energy efficient product of it’s type - Elimination of external filters and improved design reduces pressure drop through the dryer by 60% Standard Features • Outlet CO2 content to less than 1 ppm • Water dewpoint less than -70°C (-100°F) • Outlet flow capacities up to 120 L/min • Compact and lightweight design requires less space • PLC control with clear display provides feedback • Full repressurisation means no pressure fluctuations Quiet Operation • Novel exhaust air silencer significantly reduces noise levels (<60dB(a)). Easy to Maintain • Unique factory built filtration and adsorption cartridge makes servicing simple. • Less than 15 minutes req

 Open the catalogue to page 1

CO2 REMOVAL AIR DRYER NDC SERIES The F-DGS CO2 removal dryer uses the pressure swing adsorption principle of drying compressed air, utilising two identical columns each containing a hygroscopic desiccant bed. Wet air from the compressor after-cooler enters the dryer through a shuttle valve (a) and is directed into one of the desiccant columns. Each column contains a unique (and patented) desiccant cartridge which incorporates inlet and outlet filtration. Bulk liquids (water) and particles are removed by the filtration/ separation stage (b) which is located on the inlet to the cartridge. Water...

 Open the catalogue to page 2

All F-DGSi catalogues and technical brochures

  1. FTIR

    2 Pages

    En
  2. TOC

    2 Pages

    En
  3. PAR-H2

    2 Pages

    En
  4. UZAG

    2 Pages

    En

Archived catalogues

  1. MODULAR ALLIANCE

    1 Pages

    En