Catalogs >
Flow-Meter >
EASYCARE® - pressure regulator

EASYCARE® - pressure regulator
2Pages

Catalog excerpts

EASYCARE® PRESSURE REGULATORS The EASYCARE® two stage pressure regulator is suitable for direct mounting on oxygen cylinders. The structure is very compact and lightweight and it is particularly suitable for oxygen therapy. The body is made of brass and chrome-plated aluminum with an integrated impact resistant polymer calibrated orifices flowmeter with 10 options of flow oxygen supply. It is equipped with a pre-calibrated overpressure safety valve, and with a terminal unit (optional) connected to the first stage chamber which allows to get an additional and separate source of oxygen or air supplied at 4 bar. The inlet connection is offered in several options, as per the different reference standards of the destination Countries, and the outlet too is available with threads adapted to different applications. The pressure calibration of the individual stages is fixed and a pressure gauge allows to get view of the cylinder contents. A protective silicone cover prevents gauge damages caused by possible shocks received during transport or use. The small size structure and the particular technical configuration allow the EASYCARE® pressure reducers to get flows of medical gases like oxygen dispensed with extreme accuracy, even in the most difficult conditions, such as in mobile units of emergency. In fact, being the integrated flowmeter a calibrated orifices type, there is no need to get it always and only used in the upright position, as required in case of use of pressure regulator fitting conventional variable area flowmeters with vertical indicator. 02 01 EASY READING OF THE O2 FLOW; TEN READING VALUES TO IMPROVE LOW FLOWS REGULATION 02 DETAIL OF OPTIONAL OUTLET 03 ERGONOMIC KNOB REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 1

TECHNICAL SPECIFICATIONS | EASYCARE® SIZES (LxWxH) 147x55x117 mm (with UNI 11144 cylinder connection and without optional terminal unit) WEIGHT 0.81 Kg (without optional outlet) INLET CONNECTION TO THE CYLINDER UNI 11144 • EN 850 • NF-E 29-656 • BS 341-3 • DIN 477-1 • ISO 5145 • CGA 540 TERMINAL UNIT (OPTIONAL) AFNOR NF-S 90-116 • UNI 9507 • BS 5682 • DIN 13260 • SS 875 24 30 flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I...

Open the catalog to page 2