Catalogs >
Flow-Meter >
RM/145-2, RM/185-2 - flowmeters

RM/145-2, RM/185-2 - flowmeters
2Pages

Catalog excerpts

RM FLOWMETERS The flowmeters type RM/145-2 and RM/185-2 are devices for the supply of medical gases with two meters suitable in respiratory therapy. The measurement tubes are made in the body of the unit and the inlet connections are at the bottom of the units and arranged to be connected to the hospitals centralized gas plants or to gas cylinders completed with pressure regulators. For veterinary use, an anesthesia evaporator can be connected at the outlet of the dosage unit. TECHNICAL SPECIFICATIONS SIZES (LxWxH) WEIGHT less than 25 ml/min. in normal pressure conditions (ISO 5358) CHARGE LOSS LEVEL, SIDE UNDER PRESSURE (BEFORE THE ADJUSTING NEEDLE VALVES) CHARGE LOSS LEVEL, LOW PRESSURE SIDE (AFTER THE ADJUSTING NEEDLE VALVES, VAPORIZER EXCLUDED) less than 25 ml/min. at 30 cm H2O MIXED GASES OUTLET CONNECTION GASES INLET CONNECTIONS 0 22 M. - 15 F. ISO DIN 5356-1 or conical connection 23 mm F ISO DIN 5356/1 (for veterinary use only) hose connector 0 6 mm flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 1

Nt/rrwi l-OVJbdr 33*C flow-meter" ENGINEERING REVOLUTION IN MEDICAL TECHNOLOGY REGISTERED OFFICE AND FACTORY ADDRESS: Flow Meter Spa - Via del Lino, 6 - 24040 Levate - Bergamo - ITALY Ph. +39 035 594047 I Fax +39 035 59482 I info@flowmeter.it I www.flowmeter.it VAT. N. IT01737040160

Open the catalog to page 2