PRIMA Series
4Pages

Standard Components FCR PRIMA Image Reader (Model: CR-IR 391RU) AC power cord Other System Components IP cassette type CC FCR PRIMA Console, FCRView Dry Imager: DRYPIX PRIMA, DRYPIX 2000, 4000, 7000 Time Required for IP Feed/Load Processing Capacity Reading Specification Time to Start on Display Approx. 200 sec. in case of 35 ✕ 43cm Approx. 190 sec. in case of 35 ✕ 35cm Always at the primacy of digital imaging – the pride and legacy of Fujifilm Time to Print on DRYPIX PRIMA Power Supply Conditions Environmental Conditions Operating Conditions: • Temperature: 15-30°C • Humidity: 15-80%RH (No dew condensation) • Atmospheric pressure: 750-1060hPa Imaging Plate This equipment is a Class 1 laser product (IEC60825). DRYPIX PRIMA Specifications Standard Components DRYPIX PRIMA Dry Laser Imager (Model: FM-DL 100) Recording Method Laser exposure thermal development system Film Type Film Loading Daylight film loading Time Required for First Output 1 tray (5 sizes of film are available by changing film trays) Processing Capacity Film Tray Grayscale Resolution Pixel Size Input Channels One DICOM network channel Image Memory Density Adjustment Automatic density correction Fuji Medical Dry Imaging Film Power Supply Conditions Environmental Conditions Operating Conditions: • Temperature: 15-30°C • Humidity: 15-70%RH (No dew condensation) • Atmospheric pressure: 750-1060hPa FUJI COMPUTED RADIOGRAPHY This equipment is a Class 1 laser product (IEC60825). Computed Radiography/Medical Dry Laser Imager FCR PRIMA Console CR-IR 391CL Specifications are subject to change without notice. All brand names or trademarks are the property of their respective owners. In some countries, regulatory approval may be required to import medical devices. For the availability of these products, please contact your local sales representatives. 26-30, NISHIAZABU 2-CHOME, MINATO-KU, TOKYO 106-8620, JAPAN (SK·10·01·F1120·F9711) Printed in Japan ©2009 FUJIFILM Corporation

Installed units Since the launching of our first FCR product in 1983, we have been striving to develop the FCR technology further and to make available a wide range of products. Our superb technology and diversified product lineup has gained recognition from medical institutions of all practices and to date over 70,000* digital imaging systems have been installed worldwide. * As of end of September 2009 With the launch of the first FCR (Fuji Computed Radiography) product in 1983, we have brought “DIGITAL” X-ray diagnostics to the world of analog diagnostics. Since then, our products have...

From digitalize to output, this is Fujifilm’s seamless workflow DIGITALIZE Compact footprint, only 0.24m2 The FCR PRIMA is one of the most compact and lightweight reader units on the market. The required space is comparatively smaller than other similar table-top systems and can be installed in any open space. Another advantage of this unit is that you don’t need a darkroom any longer. Flexible reading in various sizes The IP cassette can read various imaging sizes such as for the chest, lumbar spine, pantomography (15 ✕ 30 cm*), and extremities. Virtually all imaging requirements can be...

Standard Components FCR PRIMA Image Reader (Model: CR-IR 391RU) AC power cord Other System Components IP cassette type CC FCR PRIMA Console, FCRView Dry Imager: DRYPIX PRIMA, DRYPIX 2000, 4000, 7000 Time Required for IP Feed/Load Processing Capacity Reading Specification Time to Start on Display Approx. 200 sec. in case of 35 ✕ 43cm Approx. 190 sec. in case of 35 ✕ 35cm Always at the primacy of digital imaging – the pride and legacy of Fujifilm Time to Print on DRYPIX PRIMA Power Supply Conditions Environmental Conditions Operating Conditions: • Temperature: 15-30°C • Humidity: 15-80%RH (No...