video corpo

Shower units technical info - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Technical information Thermostatic TMV2 levered shower Thermostatic TMV3 levered shower • Dual control – flow and temperature are controlled separately, giving accurate control of both • Thermostatic cartridge maintains showering temperature to +/- 1ºC by compensating for changes in the incoming water temperature and pressure • Automatic shut off in the event of hot or cold water supply failure, thus reducing the risk of any injury • Factory-set to a maximum of 38ºC to eliminate the ability to select an unsafe temperature • Utilises unique fast fit system – wall mount • Supplied with 1.5m hose, riser rail, hose retainer and single function handset with rub clean nozzles • Chrome plated to BS EN 248 • Product supplied with 2 x 7 litre per minute flow regulators, one fitted in each inlet to control water flow when fitted to instantaneous water heaters (combination boilers). These can be removed to suit different water delivery systems, i.e. low pressure gravity systems • Dual control – flow and temperature are controlled separately, giving accurate control of both • Thermostatic cartridge maintains showering temperature to +/- 1ºC by compensating for changes in the incoming water temperature and pressure • Automatic shut off in the event of hot or cold water supply failure, thus reducing the risk of any injury • Factory-set to a maximum of 38ºC to eliminate the ability to select an unsafe temperature • Adjustable maximum stop temperature between 35ºC-45ºC • Suitable for either high or low pressure systems • Lever controls • Supplied with 1.25m hose, riser rail, hose retainer and multi function handset with rub clean nozzles Specification Chrome finish - brass body construction W.R.A.S. cert 1001025 Temperature setting range 38-46ºC Flow rate 6.5 Ltrs at 0.2 bar Flow rate 16.5 Ltrs at 1 bar Plumbing connections Hot – 15mm compression Cold – 15mm compression W.R.A.S compliant shower Specification Chrome finish – brass body construction TMV3 thermostatic control Conforms to NHS Estates Model Engineering Specification DO8 W.R.A.S compliant shower TMV3 BC447/1208 BS EN 111, 1287 Automatic shutdown Temperature setting range 35-45ºC Flow rate 8 Ltrs at 0.1 bar Plumbing connections Hot – 15mm compression Cold – 15mm compression W.R.A.S compliant shower Water entry points Minimum running pressure/flow Maximum running pressure Maximum static pressure Open outlet flow rate Maximum flow with flow limiters Outlet connection

 Open the catalogue to page 1

Electric Care shower • BEAB Care Mark: adjustable max. temperature: 38°C, 41°C or 43°C • WRAS, RNIB, Kite Mark, CE approved • Timed shutdown to reduce water consumption (5-30 minutes) • Tri-thermostatic temperature control system • Waste pump connectivity (flow sensor maintenance not req.) • 2.0m hose & extended riser rail • 5 pattern shower head includes ‘delicate skin setting’ • Oversized start-stop button for users with reduced dexterity/vision • Audible control option - ideal for the visually impaired • Phased shutdown - reduces limescale and flushes hot water from the hose and shower-head...

 Open the catalogue to page 2

All Gainsborough Baths catalogues and technical brochures