Catalog excerpts
BALL VALVES ½” TO 4”, WITH EXTENSIONS 3 Piece Design for Ease of Maintenance Quarter-Turn, Full Port Design Valves Blow Out Proof Valve Stem Teflon® Seats And Seals Dual Gauge Port Version Lockable or Non-Lockable Handles Available Cleaned for Oxygen Service Dual Gauge Port Version Medical gas ball valves shall be manufactureed by Genstar Technologies Co., Inc. (GENTEC®). Ball valves shall be designed for concealed piping installation and available for sizes and services indicated. Ball valves shall be double seal, three piece in-line serviceable ball-type design, with forged bronze/brass body and chrome-plated brass ball. Only ¼ turn of the handle is required to operate the valve from a fully open to fully closed position. The valves shall have a full port design and incorporate an adjustable packing and a blow-out proof stem. Ball valves shall be designed for working pressure up to 600 psi WOG. Valve body shall have Teflon® material ball seat and Teflon® material stem seals. Seats/seals, lubricants and valve materials are compatible with USP oxygen, nitrous oxide, medical air, carbon dioxide, helium, nitrogen and mixtures thereof at continuous pressure up to 600 psi and vacuum service to 29" Hg. Ball valves shall be provided with type-K copper tube extensions, for making connections to the pipeline and shall include a single gauge/purge port sealed with a brass HEX plug. Locking or nonlocking handles are available (locks furnished and installed by others). All ball valves shall be supplied clean and prepared for oxygen service in accordance with current CGA G-4.1 standards. All valves shall be 100% tested for leaks and manufactured to comply with the latest edition of NFPA99. Valves shall be capped and sealed in a polyethylene bag to keep them clean prior to installation.
Open the catalog to page 1Dimensional Data Notes: A. Four Bolts Used on ½”-2”; Six Bolts Used on 2 ½”-4“ Valves B. Extension Cap C. Gauge Port with 1/8” Plug (Gauge Not Supplied) Dimensions: (Inches) Valve Size ORDERING INFORMATION VALVE Size 1/2” CATALOG NUMBER Single Port Ball Valves Dual Port Ball Valves Locking Handle (Non-Locking) Locking Handle (Non-Locking) VL1-05L1 (VL1-05N1) Valve Locking Handle Technology for a Better Future Represented by: Genstar Technologies Company, Inc. 4525 Edison Avenue Chino, CA 91710, USA Tel: 909-606-2726 Fax: 909-606-6485 www.gentechealthcare.com Copyright © 2010, Genstar...
Open the catalog to page 2All Genstar Technologies Company catalogs and technical brochures
-
CRYOGENIC GAS EQUIPMENT
18 Pages
-
Oxygen & Suction Therapy
68 Pages
-
MEDICAL HEADWALL UNITS
2 Pages
-
FM293 SERIES
1 Pages
-
Oxygen & Air Flowmeters
2 Pages
-
OxyBlend Air/Oxygen Blender
4 Pages
-
880VS SERIES
2 Pages
-
Vacuum Regulator Flush
1 Pages
-
Suction Regulator parts
1 Pages
-
Medical_Respiratory_Catalog
36 Pages
-
DIGITAL SUCTION REGULATOR
2 Pages
-
Area Valve Service Unit
2 Pages
-
Medical Gas Control Panel
2 Pages
-
co2 beverage regulator
4 Pages
-
Cutting Tips
4 Pages
-
Alternative Fuel Solutions
4 Pages
-
Gold Series
3 Pages
-
Accessories Catalog
16 Pages
-
Silver Series
2 Pages
-
Gas Control Overview
5 Pages
-
Cryogenic
8 Pages
-
Filters
6 Pages
-
Tube Fittings
32 Pages
-
Valves
12 Pages
-
Gas Safety Cabinets
2 Pages
-
Cylinder Connections
15 Pages
-
Industrial Gas Manifolds
40 Pages
-
Specialty Gas Equipment
140 Pages
-
Ultra High Purity Catalog
52 Pages
-
Medical Gas Outlets
2 Pages
-
Medical Bedhead Units
2 Pages