Medical Gas Systems & Devices Overview
32Pages

Medical Gas Systems & Devices Overview Technology for a Better Future

^^^^^GENSTAR TECHNOLOGIES

Technology for a Better Future Over 40 Years of Manufacturing Experience Medical bedhead unit -> Aluminum alloy, powder coated to protect against oxidation Single & dual trunks available Gas and electrical channels are separated by trunks to ensure safety Easy installation and maintenance Custom-ordered color available

Company Overview Genstar Technologies Company, Inc (CENTEC®), founded in 1969, is a world class manufacturer of high quality apparatus for high purity, medical and indus- trial markets. For the medical industry, GENTEC® provides high quality products such as medi- cal gas flow control systems, regulators, terminal-units, architectural products,

Medical Gas Systems Total Solution - 02-03 Zone Valve Box & Area Valve Service Unit ■ 06 Monitoring Alarm & Control System 07 Medical Console Units 09 Anaesthetic Gas Scavenging System - 14-15 Oxygen Concentrator & Nebulizers ■ 20

02 GAS FLOW CONTROL SOLUTIONS

MEDICAL CAS FLOW SOLUTIONS Pressure Detecting Point Respiratory Products Patient Room Area Alarm Pressure Detecting Point Respiratory Products Operation Room Area Alarm Oxygenerator Air Compressor Cryogenic Tank Centec Universal Monitoring Center Manifold System Vacuum Pump Master Alarm

Medical Gas Source Equipment Medical Vacuum Systems Medical Air Compressor Systems ■ Seven types of vacuum pumps available: ■ Two types of compressor available: oil-sealed Rotary Vane, Dry claw vane, Specialized oil-less reciprocating and scroll type oil-sealed Rotary Vane, Specialized dry Claw Vane, ■ Duplex, Triplex, and Quadruplex available Dry Rotary Vane, Liquid Ring, Side Channel blower ■ High quality, easy to transport ■ High quality, easy to transport ■ Advanced control system, easy to operate ■ Advanced control system, easy to operate ■ NFPA 99:2005 and NEC compliant, UL approved ■...

Medical Gas Source Equipment Cryogenic Gas Storage Tank ■ Cryogenic storage tank is applicable to the storage and use of cryogenic gas: liquid oxygen, liquid nitrogen ■ Strictly control the surface cleanliness degree of heat insulated layers and the selection of material in the ■ Advanced pipeline process design: refined liquid-filling system, efficient pressure regulating circuit and reliable double safety relief system ensures the low failure rate AUTOMATIC MAHirC-lB 5500M Series Automatic Manifold System GENTEC® 5500M series automatic changeover manifold provides continuous gas flow. The...

Zone Valve Box & Area Valve Service Unit & Gas Control Panel ■ Designed to house up to six shut-off valves, where each valve controls a different gas ■ Gas Service is distinguished by label color ■ Copper tubes are welded to prevent leakage ■ Window may be detached for maintenance of shut- ■ Wall mount style ■ Parts are cleaned according to CGA G-4.1, tubings Area Valve Service Unit ■ Includes shut-off valve and check valve with NIST connection, easy to operate and maintain ■ Diaphragm-sensed regulator provides a consistent outlet flow ■ Steel valve enclosure for durability ■ Pressure...

Monitoring Alarm & Control System Master Alarm Upper Network/ Intelligent Alarm Control Station/ Shared folder CENTEC* Universal Monitoring, Alarm and Control System (GUMACSTM) is a highly modular system utilizing the most advanced technologies in electronics and software. Accepts all 4-20mAand voltage signals and can monitor customized reading ro alarm conditions such as humidity, temperature, concentration levels, and flow rates in addition to typical pressure readings. GUMACSTM alarm series complies with the latest edition of NFPA99 and HTM 02-01.

■ Designed for hospital rooms where design is emphasized, replaces traditional bedhead units ■ The painting sits on a sliding mechanism which can hide the medical equipment ■ The art piece and exterior design can be customized to meet or match a variety ■ A wide range of medical products & ■ Gas and electric channels are insulated to ensure safety

Bedhead Units Medical bedhead unit Aluminum alloy, powder coated to protect against oxidation Single & dual trunks available Gas and electrical channels are separated by trunks to ensure safety Easy installation and maintenance Custom-ordered color available

GENTEC® Medical Gas Outlets shall be UL Listed, cleaned for medical gas service, and compliant to the latest edition of NFPA 99. They shall accept only corresponding Ohmeda®, DISS, Chemetron®, or Puritan Bennett® style quick connect adapters. Outlets are designed with an universal rough-in assembly for interchangeability on different quick connects without removing the entire outlet. For outlets providing positive pressure gas, they shall have a primary and secondary check valve, where the secondary check valve allows for servicing without isolating an entire zone. Latch Valve Assembly...

American/ French /Australian Standard Medical Gas Outlets ■ Accepts only Ohmeda, DISS, Chemetron, or Puritan Bennett style gas specific adapters ■ Unique pin index for gases to prevent interchanging of gas service ■ Universal rough-in assembly ■ Color-coded for easy gas identification ■ 360° swivel on the inlet pipe for easy installation ■ 100% tested and individually packaged ■ UL listed and complies with the latest edition of NFPA 99:2005 ■ French Standard is UL listed, NF EN 737-1 compliant ■ Australian Standard complies with NF EN 737-1 and AS 2896-1998

German/British/Japanese Standard Medical Gas Outlets ■ Color-coded for easy gas identification according to ISO 32 ■ Pressure lid can be disassembled during maintenance ■ Multiple assembly methods ■ With inspection valve, easy to maintain ■ German Standard is CE listed and compliant with EN 737-1 and DIN 13620-2 ■ British Standard is CE listed and compliant with HTM 02-01, EN 737-1 and BS 5682-1998 ■ Japanese Standard is compliant with JIST 7101

■ CENTEC® Anaesthetic Gas Scavenging System is used for the safe removal of excess anaesthetic gas and anaesthetic vapors ■ Complies with EN 737-2, EN 737-4 (TYPE 1) ■ Color-coded for easy gas service identification according to ISO 32 ■ Flow: 25-50 l/min (Pressure drop: 0.15-0.29 psi) ■ Air driving flow : 10-15 l/min (Pressure: 58 psi) ■ 100% tested and individually packaged