Dental Catalog
48Pages

612 North Avenue East, Westfield, NJ 07090-0520 Ph: 908-233-7796 Fx: 908-233-7340 www.handlermfg.com United States of America

Yesterday – Today and Tomorrow 1920 – Edward Handler, an early 1900’s emigrant from Germany, owned a small dental laboratory in Kearney, NJ. Ed designed new styles of denture flasks and less expensive denture presses. 1921 – Both the newly designed “Donham Flasks” and “Ideal Presses” were successful with the local labs. Ed found himself manufacturing the new flasks and presses at his dental lab in Kearney in addition to dentures. He added newer vulcanizers to his product line and continued to look for newer and better methods to build dentures and partials. 1923 – Ed Handler, along with two...

612 North Avenue East, Westfield, NJ 07090-0520 U.S.A Ph: 908-233-7796 Facebook: Handler Mfg View our tutorial videos on: Youtube: Handlermfg Rick Laduca DENTAL TRADE ALLIANCE Copyright © HANDLER MANUFACTURING, INC. All brand names, trademarks and registered trademarks are the property of their respective owners. Information contained within this document is subject to change without notice. All rights reserved.

NEW Lab Equipment Hazardous Containment Device for the Lab S.H.I.E.L.D. (Safety Hazard Intervention Environmental Low Cost Device) Avenger Model 86A Handler’s AVENGER is THE device that makes it efficient and easy to disinfect after EVERY polishing application, so you can be compliant. Shipping Wgt.: 6 lbs. [2.7 kg] Dimensions: 10” W x 15” D x 12” H [25cm x 38cm x 30cm] 550A UNDER BENCH PORTA-VAC DUST COLLECTOR The 550A is a compact starter dust collector of sturdy steel construction with disposable HEPA filter designed for light duty dry grinding applications in the dental laboratory. The...

NEW Lab Benches and Cabinets 241T TOOTH CABINET A 35” [90cm] wide 16 drawer cabinet built of heavy gauge sheet steel with Resistop work surface. Shallow drawers provide the perfect compact way to organize tooth inventory and storage. Cabinet and drawers finished in an oven-cured, powder-coated finish. Shipped complete with 6” Backsplash, may be ordered with 6” Riser option at additional cost. Shipping Wgt.: 320 lbs. [145.5 kg] Dimensions: 35” W x 23 3/4” D x 36 3/4” H [89cm x 58cm x 92cm] 241FLAM FLAMMABLE STORAGE CABINET A 35” [90cm] wide cabinet for storage of flammable and combustible...

Lathes & Motors Red Wing Polishing Motors have been manufactured by Handler for over 90 years. While providing a variety of horsepower ratings and speeds for the technician, Red Wing motors are made in the U.S.A., ETL listed, and known the world over for quality, dependability and affordability. Precision turned shafts made of alloy steel and double shielded ball bearings insure the smooth movement of shafts. Since 1920, Red Wing motors have provided the precision and torque required by the dental and industrial trades. We are certain you will find Handler Red Wing motors the most durable...

16B CHUK/CHANGER WITH LATHE Model 16B is the Chuk/Changer factory-installed to the right side of a 26A Low Base, Red Wing Lathe.This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds.The movement of the activating handle allows the technician to change from 1/4” [6.4mm] to 3/32” [2.4mm] burs, mandrels and chuck accessories without stopping the lathe.This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance...

An automatic chuck kit designed specifically for the changing of the chuck attachments listed below while lathe is in motion.The Auto-Chuck provides the user with fast chuck changing at a lower cost than many precision chucks.This chuck is designed for gross reduction and rough trimming. Easily installs onto a dental tapered shaft.The 67A kit includes a wrench for tightening the bur adapter. Specify 67AR (right) or 67AL (left) when ordering. Kit includes one of each: • 67-0 Auto-chuck • 67-4 Wrench 67-0 • 67-5 Stone Chuck (Right or Left) • 67-7 Tapered Chuck (Right or Left) • 67-8 3/32”...

HANDLER MACHINED LATHE CHUCKS AND SPINDLES MOST POpular 7 TAPERED STEEL CHUCK 8T JACOBS TYPE JR. CHUCK The 7 tapered chuck is designed specifically for use with buffing wheels, brushes and lead centered wheels. Precision manufactured of alloy steel, this chuck is built for placement onto lathes and polishing motors containing standard dental tapered shafts. Specify 7L (Left) or 7R (Right) when ordering. Shipping Wgt.: 6 oz [107 g] Unit Dimensions: 5/8” Shank Diameter x 3 5/8” L [2cm x 9cm] The 8T is designed specifically for use with small burs and mandrels which do not exceed 1/4” [6.3mm]...

MODEL TRIMMERS Wet and Dry APPLICATIONS Handler Model Trimmers are known the world over for quality, durability and affordability. Built of water grade aluminum, bronze and stainless steel, Handler Model Trimmers are offered in two different wheel sizes - 10” and 12”. All units are powered by industrially rated, ball bearing, capacitor start 1725 RPM motors.This non-stalling feature, along with easy access to cleaning and quick wheel change, provide a superior trimmer for your laboratory. All model trimmers are made in the U.S.A., ETL Listed and come complete for easy installation and...

A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features a larger frontal opening and additional grinding capacity to trim models faster and easier. The swing-open front housing with full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover with utility tray, makes this trimmer an excellent addition to the working laboratory. Shipped complete, ready to use with minor set-up; finished with a durable,...