compact-cart
18Pages

the compact cart with a special mission compact-cart offers an amount of work area in a particularly compact design. The low centre of gravity and the projecting castors provide outstanding tilt stability. The choice between the two basic frames “Economy” – for small cable volumes – and the outstanding “Profi” version with expanded routing capacity and optional isolating transformer make compact-cart an all-rounder in a number of areas such as Endoskopy or Ultrasound diagnostics

compact-cart Application for use measuring technical data of dialysis equipment. compact-cart Application for endoscopic spinal surgery compact-cart Arthroscopy application Technical data Order configurations compact-cart

compact-cart – the Highlights at a glance Powerful isolating transformers (2000 VA) can already be installed from a width of 450 mm and can be safely incorporated in the base. The power columns affixed to the vertical support column enable direct and concealed wiring. They can accommodate socket strips, enable neat wiring and moreover prevent the accidental unplugging of plugs. Short connection cables are assured by the soft rubber lips along the power column – offering easy cleaning, among other advantages. The power columns permit as standard separate cable routing and accommodation of...

compact-cart – IMPRESSIVE WIRING MANAGEMENT Allows for simultaneous connection of both socket strips and cables Rubber lips enable cables to emerge at any point through- out the whole length of the power column. Alternatively, the power columns can be closed off neatly and safely with cover plates. In cross-section: The compact-cart equipment cart‘s multifunctional power column. The two-column model of the compact-cart offers the unique feature of its sophisticated wiring design. It is enabled by the combination of the vertical support column and the power columns, and can be summarised...

In detail: The power column solves power feed and wiring issues neatly. All three available equipment cart widths ensure an optimum ratio of storage area to work area, thanks to the special design of the compact-cart’s base. 99

design elements and dimensions Cap of the power column (made of plastic (ABS)) Socket strip for assembly in the power column Cap of the vertical extrusion (made of plastic (ABS)) Cap of the vertical extrusion (made of plastic (ABS)) with hole (Ø 25 mm), is used with accessories in the guide Cover strip for closing the power column (optionally) Cover strips (made of soft plastic), in RAL 7035 light grey Decorative trim (made of extruded aluminium), in RAL 7035 (light grey), RAL 5015 (sky blue) or RAL 1003 (signal yellow), powder-coated Tapped strip (made of steel) for mounting all system...

Setup basic frame „Profi“ 1 base 4 twin swivel castors, lockable, Ø 100 mm or Ø 125 mm (optionally also supplied in conductive version) 2 vertical extrusions each with 2 tapped strips (in increments of 32 mm) 2 power columns ith caps and cover strips w Supplied fully assembled Please note: More detailed information on the compact-cart basic frames is provided in the chapter „System components and accessories“ on page 146. Installation height H (in units) Total height TH for castors Ø 100 mm Total height TH for castors Ø 125 mm Load capacities Basic frame (total payload) 180 kg / 396 lbs...

MODULARITY FOR NUMEROUS CONFIGURATION OPTIONS The modular structure is the defining feature of the compact-cart mobile two-column equipment carts and the entire ITD product range, which allows all support systems to be configured, customised, upgraded or easily modified for special functions and application areas using the extensive standard range. This capability allows users to react fast and consistently to any changes or new customer requirements. The T-slots on the support extrusion or special devices ensure easy assembly of the components. The display presented alongside shows a small...

Variable height support arms (with or without a swivel arm) can be attached by means of a bottom shelf, or else fastened directly to the power column. compact-cart can accommodate several types of monitors on its bottom shelf or on a cross-beam. Powerful isolating transfomers (up to 2000 VA) reduce the maximum discharge current and can be safely incorporated in the equipment cart base. An on and off switch can be optionally integrated in the power columns. Overview system components and accessories

order configurations compact-cart video cart compact-cart video cart (Installation width W: 500 mm) Order number: CC.5080.XXX 2) (Installation width W: 650 mm) Order number: CC.6582.XXX 2) Equipment cart, 35 U 1) (total height: 1306 mm), fitted with: Equipment cart, 35 U 1) (total height: 1340 mm), fitted with: 1 basic frame „Profi“ with 4 twin swivel castors, lockable, Ø 100 mm 3 shelves 1 shelf with handles at the side 1 block of drawers 1 keyboard drawer with mousepad (left / right) 1 cross piece with tilt and swivel monitor holder, universal, with VESA 75 / 100 adaption up to 14 kg /...

compact-cart video cart compact-cart video cart (Installation width W: 450 mm) Order number: VT.4510.XXX 2) (Installation width W: 500 mm) Order number: CC.5081.XXX 2) Equipment cart, 40 U 1) (total height: 1500 mm), fitted with: Equipment cart, 40 U 1) (total height: 1466 mm), fitted with: with isolating transformer 1 basic frame „Profi“ with 4 twin swivel castors, lockable, Ø 125 mm, conductive 2 shelves 1 shelf with handle, front 1 shelf for insulation monitor 1 keyboard drawer with mousepad (left / right) 1 monitor shelf with tilt and swivel monitor holder, universal, with VESA 75 / 100...

Overview System components And accessories Basic frame „Economy“ Basic frame „Profi“ Installation width Installation height 21 U 1) Installation height 30 U 1) Installation height 35 U 1) Installation height 40 U 1) Installation width Installation width Installation height 30 U 1) Installation height 35 U 1) Installation height 40 U 1) Rear door Installation height 30 U 1) Installation height 35 U 1) Installation height 40 U 1) Castor conversion kit Ø 100 mm, conductive, instead of standard Ø 100 mm Ø 125 mm, conductive, instead of standard Ø 100 mm Ø 125 mm, conductive, instead of standard...