Dental - GBR System(Titanium Mesh & Screw)
12Pages

JEII MEDICAL Guided Bone Regeneration

Indication Ordering Information_Screws - Wide Head Screw - Tenting Screw - Self-Drilling Screw(Micro/ Mid) - Mini Screw - J-Tac Ordering Information_Meshes - Fixation Hole Mesh - Horizontal Smooth Bending Mesh - Mesh Ordering Informationjnstmments

indication The GBR System are intended for use in stabilizing and fixating bone grafts, bone filling material and/or barrier membranes used for guided bone/tissue regeneration in the oral cavity. Single patient use only. It is made of Pure Titanium (Plate – ASTM F67) and Titanium alloy (Screw – ASTM F136). And it supplied as non-sterile condition. GBR System plate & Screw and its accessories (instruments) should be sterilized before use. Guided Bone Regeneration (GBR) is a procedure that regenerates missing bone prior to the placement of dental implants. This can be accomplished by using...

Ordering Information - Screws Screws Wide Head Screw Fits better to GBR mesh and membrane thanks to the wider head. Mini Screw Enables screw insertion without tapping procedure Mini Self-Tapping Screw Outer Diameter(B)

Ordering Information - Screws J-Tac Tacking system for stabilizing a membrane on maxilla / mandible. Its dome-shaped head and barbed pin keep the membrane anchored on the bone after operation. Straight or angled J-Tac shafts in conjunction with screwdriver body with silicone cap can pick-up and place the J-Tacs. J-TAC Driver Shaft for Screwdriver Handle J-TAC Driver Shaft for Screwdriver Handle J-TAC Cap for Screwdriver Handle

Ordering Information - Meshes Meshes Efficiently forms the space to protect the graft. Multiple pores on the mesh not only help blood supply but also minimize soft tissue exposures. Horizontal Smooth Bending Mesh Enables horizontal / vertical bone volume augmentation of implants site for guided bone regeneration. Its extra thin thinkness and pre-cut design offer excellent flexibility and easier shaping. Doctors can utilize this for multiple array of teeth cases, and also can fulfill better bone formation and spatial retention for stable implant. * Note : Fixation Hole Mesh is intended to be...

Ordering Information - Meshes Mesh Mesh can be cut to size depending on surgical needs. Pore diameter: Ø0.8mm Suffix -01: Thickness 0.1mm Suffix -02: Thickness 0.2mm Pore diameter: Ø1.48~ 1.88mm Suffix -01: Thickness 0.1mm Suffix -02: Thickness 0.2mm

Ordering Information - Instruments Dia. 1.0mm Drill Bit(Micro) for Angle(8mm Stop) Dia. 1.6mm Drill Bit(Mini) for Angle(12mm Stop) Dia. 1.6mm Drill Bit(Mini), (12mm Stop) Dia. 1.6mm Drill Bit(Mini), (22mm Stop) Micro Screwdriver Shaft Micro Screwdriver Shaft for Angle Mid Screwdriver Shaft for Angle Mini Screwdriver Shaft for Screwdriver Handle Mini Screwdriver Shaft for Angle Screwdriver Handle Tenting Screwdriver Shaft Tenting Screwdriver Shaft for Angle Mesh Puncher Place a mesh at the tip of the Mesh Puncher, and grab the handles to make a hole in the desired spot. Note: Punching...

Ordering Information - Instruments

Ordering Information - Instruments

Ordering Information - Instruments Screw Block for J-TAC, Ø1.4, Ø1.6, Ø2.0 Screws, Mesh and Instruments Screw Block for J-TAC, Ø1.4, Ø1.6, Ø2.0 Screws, Mesh and Instruments Screw Block for J-TAC, Ø1.4, Ø2.0 Screws, Mesh and Instruments Screw Block for J-TAC, Ø1.4, Ø1.6, Ø2.0 Screws Screw Block Screw Block Screw Block Screw Block Screw Block Screw Block for J-TAC, Ø1.4, Ø1.6, Ø2.0 Screws, Instruments

JEILMEDICAL CORPORATION 702·703·704·705·706·804·805·807·812·815-ho, 55, Digital-ro 34-gil, Guro-gu, Seoul, 08378, Rep. of Korea DOMESTIC SALES INTERNATIONAL SALES T 82.2.850.3935 F 82.2.850.3537 E global@jeilmed.co.kr