Flame Photometers FP8000 Series - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

MEASURING QUALITY. SINCE 1796 FLAME PHOTOMETER FP8000 SERIES DETERMING THE CONCENTRATION OF ALKALINE AND EARTH ALKALINE ELEMENTS IN THE LABORATORY AND PROCESS ANALYSIS BR_Flammenphotometer_FP8000_EN Version 1.3 | Stand: November 2015 | Änderungen und Irrtümer vorbehalten

 Open the catalogue to page 1

FLAME PHOTOMETER FP8000 SERIES The A.KRÜSS flame photometers allow simple and cost-effective determination of alkali and alkaline earth element concentrations in aqueous solutions. They are mainly used in laboratory and process operations. With the FP8000 series A.KRÜSS Optronic presents worldwide unique measuring devices for simultaneous measurement of the elements Na, K, Ca and Li. Five measurement channels are available to be individually configured. Thanks to the proven measurement procedure as well as to modern device electronics and innovative process control, our flame photometers achieve...

 Open the catalogue to page 2

SOLUTIONS FOR VARIOUS NEEDS Standard version for Laboratory Version with automated sample feed Version with automated sample feed and dilution Economic entry solution Remote control of multiple devices via centre process computer SAMPLER DILUTER BR_Flammenphotometer_FP8000_EN Version 1.3 | Stand: November 2015 | Änderungen und Irrtümer vorbehalten

 Open the catalogue to page 3

EQUIPMENT AND FIELDS OF APPLICATION FP8400 DETERMING CONCENTRATION EQUIPMENT Determining the concentrations of alkaline and alkaline earth elements in aqueous solutions for laboratory and process operations Na, K, Ca, Li - Propane or acetylene Basic device+ External valve box with control unit (Online Measurement) Sampler and external sample table and control unit External automation system consisting of: sampler, diluter and mixer Laboratory analysis Process analysis Quality control and evidence Quality control and evidence Quality control and evidence Process monitoring Food laboratories Food...

 Open the catalogue to page 4

EASY HANDLING AND OPERATING COMFORT Our flame photometers are easy and intuitive to use on a large touchscreen display and with USB mouse. The FP8000 series is designed for using propane or acetylene as fuel gas Purified and dried compressed air is required for operation. CALIBRATION, SAMPLES, CONTROLS AND STANDARDS Aqueous samples, controls and standards can be measured manually or automatically. Calibration is carried out via the standards. Measurement results can be checked with the controls. For reviewing, emission and concentration values of calibration are presented in graphed and tabulated...

 Open the catalogue to page 5

MEASUREMENT PRINCIPLE, FUNCTIONALITY, INNOVATIVE PROCESS CONTROL MEASUREMENT PRINCIPLE OF FLAME PHOTOMETERS The flame photometers of the FP8000 series apply a relative measurement method according to the principle of flame atomic emission spectroscopy (F-AES). FUNCTIONALITY OF THE FP8000 SERIES The FP-8000 devices come with five independent measurement channels and another, separate channel for monitoring the flame. The five measurement channels can be fitted with appropriate filters. The devices do not necessarily need a guideline, measurement can be done both with and without reference element. INNOVATIVE...

 Open the catalogue to page 6

HIGH SAFETY STANDARD FOR MAXIMUM OPERATIONAL SAFETY Various safety mechanisms ensure particularly high operational safety. Such as a safety circuit for interrupting the supply of gas preventing leakage of unburned gases, or as a flame recoil blocker preventing the backward burning of an extinguished flame. SOME ESSENTIAL SAFETY MECHANISMS Automated ignition • Controlled and safe ignition sequence Optical infrared flame monitoring • Continuous monitoring of flame via infrared sensor Continuous monitoring of gas pressure • Fuel, Oxidant and Cooling air BR_Flammenphotometer_FP8000_EN Version 1.3...

 Open the catalogue to page 7

HIGH SAFETY STANDARD FOR MAXIMUM OPERATIONAL SAFETY SOME ESSENTIAL SAFETY MECHANISMS Automated gas shut down • In case of an extinguished flame • In case of regular system shut down • In case of power breakdown • In case of low fuel-gas, oxidant or cooling air pressure • The monitoring of the safety functions is performed by an independent safety circuit Exhaust emission • To avoid injury due to hot exhaust gases, exhaust gas temperatures are held at a cooling air temperature below 50 °C BR_Flammenphotometer_FP8000_EN Version 1.3 | Stand: November 2015 | Änderungen und Irrtümer vorb

 Open the catalogue to page 8

INTERFACES AND DATA EXPORT Serial ASCII printer USB USB flash drive Barcode scanner Keyboard Mouse Network printer Network share LIMS Print-out on serial ASCII printer at RS-232 interface Print-out on network printer in PDF or GS format Print-out as PDF on USB flash drive or to network share Export of the measurement results in HTML or CSV format on USB flash drive or to network share Easy integration into existing networks (DHCP client) or a LIMS BR_Flammenphotometer_FP8000_EN Version 1.3 | Stand: November 2015 | Änderungen und Irrtümer vorbe

 Open the catalogue to page 9

SERVICE AND MAINTENANCE – YOUR BENEFITS AS AN A.KRÜSS CUSTOMER On site services by A.KRÜSS Optronic or certified service partner: : Service Maintenance Initial installation and commissioning DQ/IQ/OQ/PQ Calibration and adjustment Calibration and adjustment with defined standard solutions Customer-specific customisation of devices (e. g. optimisation of measuring range) Spare parts and accessories directly from the manufacturer Maintenance contracts, calibration certificates Individual training and application consulting on site BR_Flammenphotometer_FP8000_EN Version 1.3 | Stand: November 2015...

 Open the catalogue to page 10

Economic, robust and durable solution for use in laboratory and process operation Flame photometry simultaneous measurement of up to five alkaline and alkaline earth elements Use as table top unit or integration into a process environment (analogue current interface) TFT-Display with integrated touchscreen, 8,4“ (21 cm), 800x600 Pixel Easy and intuitive operation, available in German and English language (others on request) Aqueous samples, controls and standards are measured manually or automatically Graphic and tabular presentation of emission and calibration curves Method Management: create...

 Open the catalogue to page 11

All A. KRÜSS Optronic GmbH catalogues and technical brochures

  1. Microscopes

    20 Pages

    En
  2. Density Meters

    16 Pages

    En
  3. Polarimeters

    28 Pages

    En
  4. Refractometers

    20 Pages

    En