video corpo

KwickScreen Pro User Manual
20Pages

{{requestButtons}}

Catalog excerpts

KwickScreen Pro User Manual - 1

The most flexible space management solutions Portable, retractable, printable privacy screens; creating private and dignified spaces adaptable to multiple uses.

Open the catalog to page 1
KwickScreen Pro User Manual - 2

Please read all instructions in this user guide prior to installation and operation of your KwickScreen. For personal and operational safety use only parts approved by KwickScreen. Be gentle when pulling the KwickScreen out for use. Before installation ensure all parts are present, complete and without defects. KwickScreens must be allowed to find their “natural position”. If you find the screen difficult to push in or pull out, or you hear a crumpling sound, then reverse your action (push if pulling and pull if pushing). If you believe parts to be missing please contact us. Packaging...

Open the catalog to page 2
KwickScreen Pro User Manual - 3

Dear valued customer, Thank you for choosing to purchase from KwickScreen. I hope that your new KwickScreen will help you make better use of your spaces and if you have chosen a printed screen, that you enjoy the benefits which the images can bring to your environment. I am passionate about using technology to improve environments. As a designer and engineer I invented the KwickScreen to help solve space issues. For a room to be used efficiently and appropriately it needs to be flexible both spatially and visually. Every multi-use room, from a hospital ward, to a gym, a private meeting room...

Open the catalog to page 3
KwickScreen Pro User Manual - 4

VIEW & DIMENSIONS Fully Assembled Weight = 29.5 kg Handle Base Weight = 4.36 kg Body Base Weight = 8.22 kg

Open the catalog to page 4
KwickScreen Pro User Manual - 5

ASSEMBLY GUIDE KWICKSCREEN PORTABLE UNIT Included: Please read the following instructions. Main Body with Inner Screen To begin lay down main body and front handle sideways to start working. Body Base Handle Base Please ensure all screws are tight after assembly. If you have any questions please contact us at: www.kwickscreen.com call us on: 020 845 25975 or email us: info@kwickscreen.com Braked Castor for Main Body Unbraked Castor for Handle* x4 *unless brakes requested on front handle Short Bolt x8 Handle Spacer Long Bolt Split Spring Washer You will need to supply: 13mm Spanner

Open the catalog to page 5
KwickScreen Pro User Manual - 6

BASE ASSEMBLY Make sure the flat side is against the body Tighten very well

Open the catalog to page 6
KwickScreen Pro User Manual - 7

Step 3 Tighten the bolts Tighten very well

Open the catalog to page 7
KwickScreen Pro User Manual - 8

On the main base, push on the wheels with brakes Tighten very well

Open the catalog to page 8
KwickScreen Pro User Manual - 9

On the handle base, push on the wheels without brakes Option: wheels with brakes will be supplied if purchased separately for the front handle

Open the catalog to page 9
KwickScreen Pro User Manual - 10

ASSEMBLED PRODUCT

Open the catalog to page 10
KwickScreen Pro User Manual - 11

ASSEMBLY GUIDE KWICKSCREEN FIXED UNIT Included: Main Body with Inner Screen Please read the following instructions. To begin lay down main body and front handle sideways to start working. x1 Channel Inserts x4 Front Handle Base Please ensure all screws are tight after assembly. If you have any questions please contact us at: www.kwickscreen.com call us on: 020 845 25975 or email us: info@kwickscreen.com Fixings: Wall Bracket Split Spring Washer *you may need to replace fixings depending on the wall you wish to attach to. You will need to supply: 13mm Spanner Wall Fixings*

Open the catalog to page 11
KwickScreen Pro User Manual - 12

WALL BRACKETS Bracket pairs are a set of top and bottom brackets which allow a KwickScreen unit to be attached to a wall. Brackets may only be fixed to the side channels of a KwickScreen. The channel nuts need to be inserted into the channel first to allow the bracket to attach to the unit.

Open the catalog to page 12
KwickScreen Pro User Manual - 13

Tighten very well Push on the wheels on base

Open the catalog to page 13
KwickScreen Pro User Manual - 14

Step 4 The height of the brackets should be such that the top of the main body and top of the front handle are level. *Wall fixings not included

Open the catalog to page 14
KwickScreen Pro User Manual - 15

ASSEMBLED PRODUCT

Open the catalog to page 15
KwickScreen Pro User Manual - 16

REPLACING OR CHANGING THE INNER PANEL (2 person job) © Extend unit fully (unit shown with inner screen panel removed) by applying all 4 brakes on the main body and pulling out the handle © To insert the inner panel keep the panel rolled up and attach the zip in the top left corner. To get started one person should roll whilst the other starts the zip © Support the rolled panel in one hand, slowly zip along the top of the panel as you unroll the panel

Open the catalog to page 16
KwickScreen Pro User Manual - 17

4 Leave 50 cm unzipped and thread the panel end around the plastic core. Carefully align and secure the corresponding magnetic strip on the panel and the rotor and then zip the top zip to the end. main body front handle 5 Align the magnetic strip on the front handle

Open the catalog to page 17
KwickScreen Pro User Manual - 18

KwickScreens have been designed in line with infection control performance specifications. It's smooth surfaces are easy to clean and designed to withstand regular cleaning. The body is made of anodized aluminium, other metal parts are powder coated steel. The screen panel is made with polyester film. NORMAL CLEANING Surfaces can be cleaned using most healthcare cleaning solutions including quaternary, bleach solutions or sporicidal and virucidal disinfectants. Hyplochlorite may also be used on the screen material. Hypochlorite can be applied at 100010000 ppm or a 60% alcohol solution....

Open the catalog to page 18
KwickScreen Pro User Manual - 19

OPERATION GENERAL INSTRUCTIONS KwickScreens are designed for use on smooth, horizontal surfaces. Extra care should be taken when using on other surfaces. When moving the KwickScreen check all four brakes have been released. The unit should then be moved with two hands at low down waist height. Push and pull the front handle gently during operation. If the handle needs to be forced please contact us. If there is resistance or you hear a crumpling sound then stop, pull out and push in again gently. Make sure the front handle is vertical and that its four wheels are all in contact with the...

Open the catalog to page 19
KwickScreen Pro User Manual - 20

DAMAGE PROCEDURE If you do experience any problems or damage with your screen, please email us (with images if applicable) to info@kwickscreen.com. If you have any questions please contact us at: www.kwickscreen.com / info@kwickscreen.com You can call us on: 020 845 25975 Or visit us at: Unit 3, Phoenix Trading Estate, Bilton Road, London. UB6 7DZ Printed on 100% recycled paper.

Open the catalog to page 20

All KwickScreen catalogs and technical brochures