MEA2100
6Pages

Higher throughput with flexible multi-well solutions The MEA2100-System offers the possibility to connect two headstages to one interface board. This way, you can record General characteristics from up to 240 channels. For example, you can connect two headstages for two 60-electrode MEAs each. If four 6-well MEAs are used in two headstages, it is possible to record from 24 wells in parallel. However, you are Headstage: 250 mm x 151 mm x 25 mm Interface board: 250 mm x 83 mm x 25mm Weight Headstage: 1.0 kg Interface board: 0.3 kg not limited to multi-well solutions. By using different MEAs, the setup can be optimized for a completely different application within seconds. Data resolution Number of recording channels 60-256 (depending on headstage type) 6-well MEA In the 6-well microelectrode array, the 60 recording electrodes are Stimulus generator Number of stimulation channels 3 independent patterns per MEA slot (2 for MEA2100-HS256) Independent measurements can be performed in each well. Available waveforms rectangular, sine wave, arbitrary These arrays are ideal for toxicology, stem cell research, and safety Output current pharmacology, as they considerably increase the throughput Output voltage divided into 6 independent wells with 9 recording electrodes each. of your system. A maximum of 24 wells on four MEAs can be recorded in parallel with one MEA2100-System. Data converter and USB interface Control interface Sampling rate per channel Heating element and temperature sensor Temperature accuracy Temperature sensor type Interface board 3.0 multiboot ± 0.1 °C PT 100 with 4 wire connection Versatile in vitro recording system: MEA2100-System The MCS-IFB 3.0 multiboot is a new generation of interface boards, which enables you to Operating system Windows 10, 8.1 or 7 (64 bit) English and German versions are supported operate a wide range of MCS in vitro and in vivo headstages: MEA2100-HS, MEA2100-Mini-HS, Multi Channel Experimenter Multi Channel Analyzer Multi Channel DataManager Data export HDF5 (*.h5) (Matlab, Python, R, etc.), NeuroExplorer (*.nex), Spike2 (*.smr), ASCII file (*.txt), European Data Format (*EDF+) MEA2100-Beta-Screen, Multiwell-MEA-HS, CMOS-MEA-HS, W2100-RE, and ME2100-HS. This allows cost-effective combinations with only one interface board and multiple recording systems. As a result, you have even more flexibility in switching between possible configurations for your specific research needs. You can establish your experiments for example on 60 or 120 electrodes with the Multiwell-headstage and start high throughput screening. It is also possible to use the same interface board for in vitro MEA r electro olutions fo te s For comple ys.com mart-eph www.s • Filter bandwidth adjustable via software • 24 bit resolution Multi Channel Systems MCS GmbH experiments and wireless in vivo recordings. This new interface board provides flexibility at its best. • Integrated stimulation and blanking visit: physiology © August 2018 Multi Channel Systems MCS GmbH Product information is subject to change without notice. Products that are referred to in this document may be either trademarks and/or registered trademarks of the respective owners. The publisher and the author make no claim to these trademarks. • Real-time feedback Aspenhaustrasse 21 72770 Reutlingen Germany sales@multichannelsystems.com www.multichannelsystems.com • Variable contact units for microelectrode arrays with 60, 120 or

Versatile in vitro recording system: MEA2100-System The MEA2100-System is a versatile in vitro recording system with stimulation patterns (monophasic, biphasic, bursts) per available 60-electrode MEAs: The widest range integrated stimulation, following the tradition of high-quality, low- MEA. You can choose between current and voltage stimulation noise amplifiers. and select each electrode for stimulation. All configurations MEAs with 60 electrodes are available in many variations. They It is the complete setup for extracellular recordings from Interface board with signal processor...

Versatile in vitro recording system: MEA2100-System The MEA2100-System is a versatile in vitro recording system with stimulation patterns (monophasic, biphasic, bursts) per available 60-electrode MEAs: The widest range integrated stimulation, following the tradition of high-quality, low- MEA. You can choose between current and voltage stimulation noise amplifiers. and select each electrode for stimulation. All configurations MEAs with 60 electrodes are available in many variations. They It is the complete setup for extracellular recordings from Interface board with signal processor...

Versatile in vitro recording system: MEA2100-System The MEA2100-System is a versatile in vitro recording system with stimulation patterns (monophasic, biphasic, bursts) per available 60-electrode MEAs: The widest range integrated stimulation, following the tradition of high-quality, low- MEA. You can choose between current and voltage stimulation noise amplifiers. and select each electrode for stimulation. All configurations MEAs with 60 electrodes are available in many variations. They It is the complete setup for extracellular recordings from Interface board with signal processor...

Higher throughput with flexible multi-well solutions The MEA2100-System offers the possibility to connect two headstages to one interface board. This way, you can record General characteristics from up to 240 channels. For example, you can connect two headstages for two 60-electrode MEAs each. If four 6-well MEAs are used in two headstages, it is possible to record from 24 wells in parallel. However, you are Headstage: 250 mm x 151 mm x 25 mm Interface board: 250 mm x 83 mm x 25mm Weight Headstage: 1.0 kg Interface board: 0.3 kg not limited to multi-well solutions. By using different MEAs,...

Higher throughput with flexible multi-well solutions The MEA2100-System offers the possibility to connect two headstages to one interface board. This way, you can record General characteristics from up to 240 channels. For example, you can connect two headstages for two 60-electrode MEAs each. If four 6-well MEAs are used in two headstages, it is possible to record from 24 wells in parallel. However, you are Headstage: 250 mm x 151 mm x 25 mm Interface board: 250 mm x 83 mm x 25mm Weight Headstage: 1.0 kg Interface board: 0.3 kg not limited to multi-well solutions. By using different MEAs,...