Dental Furnaces and Accessories
16Pages

MORE THAN HEAT 30-3000 "C Translucent Zirconia CoCr Alloys CAD/CAM Systems Burnout Furnaces Model Casting Production Furnaces www.nabertherm.com Germany

Made in Germany Nabertherm with 350 employees worldwide have been developing and producing industrial furnaces for many different applications for over 60 years. As a manufacturer, Nabertherm offers the widest and deepest range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are ensured due to our complete inhouse production and our wide variety of standard furnaces. Setting Standards in Quality and Reliability Nabertherm does not only offer the widest range of...

Table of Contents Page Zirconia Sintering Furnaces Burnout Furnaces

High-Temperature Chamber Furnace up to 1650 °C, also suitable for Sintering Translucent Zirconia LHT 03/17 D The first-class workmanship using high-quality materials combined with ease of operation makes this model an all-rounder for the dental laboratory. This high-temperature chamber furnace is perfectly suited for the sintering of translucent zirconia units. The special molybdenumdiscilicide heating elements offer best possible protection against chemical interaction between charge and heating elements. When using liquid shading colors it must be ensured that the charge has been fully...

High-Temperature Lift-Bottom Furnace up to 1650 °C with Integrated Speed Cooling System LHT 02/17 LB Speed Due to its maximum temperature of 1650 °C this model is perfectly suited for sintering of translucent zirconia. The electrically driven lift-bottom provides for easy charging. The heating all around the cylindrical furnace chamber provides for a good temperature uniformity. By using special heating elements made of molydenum disilicide crowns and bridges are protected against chemical contamination at the best. When using liquid shading colors it must be ensured that the charge has...

High-Temperature Furnace with SiC Rod Heating for Sintering Zirconia up to 1550 °C HTCT 01/16 Designed as table model with SiC heating rods, this model offers numerous advantages when sintering zirconia. The large heating chamber and fast heating-up times make this model a good selection for the CAD/CAM processing of zirconia. The furnace controller can be freely programmed for the individual sintering of the zirconia material. The model HTCT 01/16 is moreover designed for connection to the single-phase mains supply. When using liquid shading colors it must be ensured that the charge has...

MORE THAN HEAT 30-3000 °C Sintering Furnaces for CoCr Alloys RHTC 80-450/15 with manual gas supply system Depending on the process the sintering of milled bridges and crowns made of cobalt chrome (CoCr) requires a furnace in which the heat treatment process can be carried out under inert gas, reaction gas or even under vacuum. The requirements on the furnace may vary depending on the CoCr alloy. Proven good results are achieved in vacuum chamber or tube furnaces (see catalog laboratory for detailed description). FrrtailiT-g P-jmiEPi Wflh-Ti ^IPIIIEI-QVW YKLHH FvfflMtt V-fcr-nf (input...

Burnout Furnaces Professional Furnaces with Flap Door or Lift Door L 1/12 - LT 15/12 These burnout furnaces are the perfect choice for daily work in the dental laboratory. These furnaces stand for excellent workmanship, advanced, attractive design and highest level of reliability. They are perfectly suitable for burnout of muffles and also for speed investments. These furnaces come equipped with either a flap door or lift door at no extra charge. Furnaces L 3/11 - LT 15/12 come with a fiber insulation for 1100 °C or 1200 °C. Adjustable air inlet integrated in the door Over-temperature...

Maximum Chargeable Number of Burnout Muffles see Page 15 Model Lift door L, LT 3/11 L, LT 5/11 L, LT 9/11 L, LT 15/11

Compact Burnout Furnaces LE 1/11 - LE 14/11 With their unbeatable price/performance ratio, these compact burnout furnaces are perfect for burnout in the dental laboratory. They convince by very fast possible heating ramps and attractive design. Quality features like the dual shell housing of stainless steel, their compact, lightweight design, or the heating elements installed in quartz glass tubes make these models a reliable partner for your dental application. Maximum chargeable number of burnout muffles see page 15 Tmax 1100 °C, working temperature 1050 °C Heating from two sides from...

Burnout Furnaces with Brick Insulation N 7/H - N 17/HR With their brick insulation and the robust table-top design, furnaces N 7/H - N 17/HR are the workhorses for the daily use in the dental laboratory. Heating elements in both sides and the bottom provide for excellent temperature uniformity even if the furnace is fully charged. The furnaces can be used for the burnout of muffles or for speed investments. Tmax 1280 °C Three-sided heating from both sides and the bottom Heating elements on support tubes ensure free heat radiation and a long service life Bottom heating protected by...

Accessories for Sintering Furnaces Sintering Dish, Ø 115 mm Article No.: 699001054 Spacer Ring with Ventilation Openings Article No.: 699001055 Charge Saggars for Sintering Furnaces LHT 02/17 LB Speed and LHT 03/17 D For charging zirconia workpieces charge saggars are recommended. A saggar basically consists of the sintering dish as base and the spacer ring with ventilation openings. The material is highly resistant to temperature fluctuations and can be used for processes with short heat-up and cool-down times. When charging the furnace it must be ensured that the lower charge carrier is...

Accessories for Preheating Furnaces Chimney for connection to an exhaust pipe. Chimney with fan, to remove exhaust gas from the furnace better. The P 330 controller can be used to activate the fan automatically.* Catalytic converter with fan for removal of organic components from the exhaust air. Organic components are catalytically oxidized at about 600 °C, broken into carbon dioxide and water vapour. Irritating odors are thus largely eliminated. The P 330 controller can be used to switch the catalytic converter automatically.* * Note: If other controller types are used an adapter cable...