video corpo

Dental - 16 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

  7. P. 7

  8. P. 8

  9. P. 9

  10. P. 10

Catalogue excerpts

MORE THAN HEAT 30-3000°C Translucent Zirconia CoCr Alloys CAD/CAM Systems Burnout Furnaces Laser Sintering Model Casting Production Furnaces www.nabertherm.com Germany

 Open the catalogue to page 1

Made in Germany Nabertherm with 400 employees worldwide have been developing and producing industrial furnaces for many different applications for over 60 years. As a manufacturer, Nabertherm offers the widest and deepest range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are ensured due to our complete inhouse production and our wide variety of standard furnaces. Setting Standards in Quality and Reliability Nabertherm does not only offer the widest range of standard...

 Open the catalogue to page 2

Table of Contents Page Zirconia Sintering Furnaces Burnout Furnaces

 Open the catalogue to page 3

High-Temperature Chamber Furnace up to 1650 °C suitable for Sintering Translucent Zirconia LHT 03/17 D The first-class workmanship using high-quality materials combined with ease of operation makes this model an all-rounder for the dental laboratory. This high-temperature chamber furnace is perfectly suited for the sintering of translucent zirconia units. The special molybdenum-discilicide heating elements offer best possible protection against chemical interaction between charge and heating elements. When using liquid shading colors it must be ensured that the charge has been fully dried before...

 Open the catalogue to page 4

High-Temperature Lift-Bottom Furnace up to 1650 °C for Sintering of Translucent Zirconia with Integrated Speed Cooling System LHT 02/17 LB Speed Due to its maximum temperature of 1650 °C this model is perfectly suited for sintering of translucent zirconia. The electrically driven lift-bottom provides for easy charging. The heating all around the cylindrical furnace chamber provides for a good temperature uniformity. By using special heating elements made of molydenum disilicide crowns and bridges are protected against chemical contamination at the best. When using liquid shading colors it must...

 Open the catalogue to page 5

High-Temperature Furnace with SiC Rod Heating for Sintering Zirconia up to 1550 °C HTCT 01/16 Designed as table model with SiC heating rods, this model offers numerous advantages when sintering zirconia. The large heating chamber and fast heating-up times make this model a good selection for the CAD/CAM processing of zirconia. The furnace controller can be freely programmed for the individual sintering of the zirconia material. The model HTCT 01/16 is moreover designed for connection to the single-phase mains supply. When using liquid shading colors it must be ensured that the charge has been...

 Open the catalogue to page 6

Production Furnaces for Debinding, Presintering or for Sintering In addition to the furnaces shown for sintering in laboratory scale, Nabertherm also offers numerous solutions for production. For the production of zirconia blanks there are e.g. production plants that initially provide for the debinding followed by the presintering of the product. In these plants, highest precision with regard to temperature uniformity and reproducibility is of utmost importance in order to satisfy the requirements on the blank with respect to shrinkage and compliance with the later sintering temperature. For the...

 Open the catalogue to page 7

Burnout Furnaces for Burn-Out of Muffles and Speed Investment Material L 1/12 - LT 15/12 These burnout furnaces are the perfect choice for daily work in the dental laboratory. These furnaces stand for excellent workmanship, advanced, attractive design and highest level of reliability. They are perfectly suitable for burnout of muffles and also for speed investments. These furnaces come equipped with either a flap door or lift door at no extra charge. Furnaces L 3/11 - LT 15/12 come with a fiber insulation for 1100 °C or 1200 °C. Adjustable air inlet integrated in the door Over-temperature limiter Tmax...

 Open the catalogue to page 8

Protective gas connection for non-flammable protective or reaction gases Manual or automatic gas supply system Please see page 13 for more accessories Process control and documentation with Controltherm MV software package see page 15 Maximum Chargeable Number of Burnout Muffles see Page 15

 Open the catalogue to page 9

Compact Burnout Furnaces LE 1/11 - LE 14/11 With their unbeatable price/performance ratio, these compact burnout furnaces are perfect for burnout in the dental laboratory. They convince by very fast possible heating ramps and attractive design. Quality features like the dual shell housing of stainless steel, their compact, lightweight design, or the heating elements installed in quartz glass tubes make these models a reliable partner for your dental application. Maximum chargeable number of burnout muffles see page 15 Tmax 1100 °C, working temperature 1050 °C Heating from two sides from heating...

 Open the catalogue to page 10

Burnout Furnaces with Brick Insulation N 7/H - N 17/HR With their brick insulation and the robust table-top design, furnaces N 7/H - N 17/HR are the workhorses for the daily use in the dental laboratory. Heating elements in both sides and the bottom provide for excellent temperature uniformity even if the furnace is fully charged. The furnaces can be used for the burnout of muffles or for speed investments. Tmax 1280 °C Three-sided heating from both sides and the bottom Heating elements protected in grooves Bottom heating protected by heat-resistant SiC plate Multi-layer insulation with high-quality...

 Open the catalogue to page 11

Accessories for Sintering Furnaces Sintering Dish, Ø 115 mm Article No.: 699001054 Spacer Ring with Ventilation Openings Article No.: 699001055 Charge Saggars for Sintering Furnaces LHT 02/17 LB Speed and LHT 03/17 D For charging zirconia workpieces charge saggars are recommended. A saggar basically consists of the sintering dish as base and the spacer ring with ventilation openings. The material is highly resistant to temperature fluctuations and can be used for processes with short heat-up and cool-down times. When charging the furnace it must be ensured that the lower charge carrier is generally...

 Open the catalogue to page 12

All Nabertherm catalogues and technical brochures

  1. Laboratory

    64 Pages

    En