• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Model 755V Centrifuge - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Model 755 24-Place Horizontal • Variable Speed A laboratory centrifuge in a class by itself. Control panel lights inform the operator of the machine’s current status Large Capacity- up to twenty-four (24) 10mL Test Tubes, twelve (12) 15mL Test Tubes, or six (6) 50mL tubes Brushless-DC Motor Full Horizontal Separation for Best Results Automatic Braking Reduces Cycle Time Audible End-of-Run Indicator Push-Button Operation/Safety Lid-Lock ETL Compliant to ANSI/UL Standards Cycle Counter to Monitor Machine Usage General Specifications for the Horizon Elite, Model 755 Centrifuge NOTE: Specifications subject to change. The Horizon Elite, model 755, truly delivers. Its brushless DC motor provides for extremely smooth operation and precise speed control. Select from several rotor options to suit your needs, (see reverse) and choose either singlespeed or variable. Precise Variable Speed Control (model 755V) Overall Height: Dimensions: Width: Depth: Max Acceleration Time: Max Deceleration Time: Weight: Centrifuge Motor: Protection Breaker: Timer: Max. Power Requirements: Voltage: Frequency: 9.0 in. (23 cm) 14.5 in. (37 cm) 17 in. (43 cm) 15 seconds 15 seconds 39 lbs. (17.7 kg) 1/30 H.P. AC 4 Amp. Re–settable Electronic, 1 to 30 minutes +/- 1% 200 Watts 115/230 (+/-10%) Volts 50/60 Hz A horizontal rotor produces better separation with a tighter gel line, eliminating remixing and re-spins. 10mL test tubes up to 17mm x 100mm, 15mL test tubes up to 17mm x 125mm, with the Standard Rotor UL Std. 61010A-1 and UL Std. 61010A-2-20, CAN/ CSA C22.2 No. 1010.1 and CAN/CSA C22.2 No. 1010.2.20 Form No. 389 Model 755 Specifi

 Open the catalogue to page 1

OPERATING FEATURES SAFETY FEATURES • ELECTRONIC TIMER: Time is selectable from 1 to 30 minutes. • BRUSHLESS DC MOTOR: For smooth and quiet operation. • ELECTRONIC BRAKING: Braking reduces the deceleration time to approximately 15 seconds. • END-OF-RUN AUDIBLE INDICATOR: Several beeps are sounded once the rotor has stopped to inform the operator that a cycle is completed. • VARIABLE SPEED: The precision variable speed control gives the operator the ability to select from 500 RPM to the max. variable rotor speed (see table). • QUIET OPERATION WITH LOW VIBRATION: The Double- encased motor and steel...

 Open the catalogue to page 2

All QBC Diagnostics catalogues and technical brochures

  1. 842VES

    2 Pages

    En
  2. APEX 12

    4 Pages

    En
  3. APEX 24

    4 Pages

    En
  4. APEX 6

    4 Pages

    En