S 600
8Pages

{{requestButtons}}

Catalog excerpts

S 600 - 1

Research HPLCHPLC SYSTEM S 170 EXPERT System S 600 The Sykam RESEARCH HPLC System S 600 is intended for the ambitious analyst. The system configuration is highly variable and several upgrade options make this system suitable for the whole range of analytical applications. Dual-Piston Pumphead S 1130 HPLC Pump System Optional: Piston Backflushing The S 1130 pumps use a dual-piston pumphead for low pulsation. Together with electronic pressure compensation the S 1130 pumps are suitable for all analytical tasks in HPLC and GPC. The S 1130’s pump head incorporates an optional The Sykam S 1130 HPLC Pump System is a very active piston backflushing system; this system is inflexible and powerful HPLC solvent delivery system. terchangeable with old Sykam pumps and does not Its modular setup makes the S 1130 one of the most require an additional motor. versatile pump systems on the market. The possible configurations include an Isocratic, Quaternary Gradient Pump or a Binary High-Pressure Gradient Pump. Stepper Motor The S 1130 is driven by a high-power stepper motor. The stepper motor has a much better resolution in the low-flow range than a conventional DC motor. Active Mixer The S 1130 low pressure and high pressure gradient module has an active mixer to achieve highly precise and accurate gradient results. Lubrication The S 1130 camshaft is constantly lubricated within a sealed chamber to guarantee long lifetime and low maintenance.

Open the catalog to page 1
S 600 - 2

One Pump — Three Configurations A ACTIVE MIXING CHAMBER PRESSURE SENSOR DUAL-PISTON PUMPHEAD Figure: S 1130 Isocratic Flowchart PRESSURE SENSOR PRESSURE SENSOR ACTIVE MIXING CHAMBER DUAL-PISTON PUMPHEAD Figure: S 1130G LP Gradient Flowchart Technical Specifications VACUUM PUMP DUAL-PISTON PUMPHEADS VACUUM PUMP VACUUM CHAMBER VACUUM CHAMBER Figure: S 1132 HP Gradient Flowchart S 1130G Quaternary Gradient Pump Wetted Materials: Stainless Steel / PEEK*, Teflon AF®, PVDF, Ceramics, Sapphire, Ruby Vacuum Degassing: optional: < 20% dissolved gases remaining in water @ 1.000 ml/min Flow Rate:...

Open the catalog to page 2
S 600 - 3

S 1130 Configurations S 1130 Isocratic HPLC Pump The S 1130 Isocratic Pump is a robust, low-pulsation solvent delivery system. The pumphead is easily accessible from the front panel to make routine maintenance, like changing pump seals, easy and fast. The system is available with Micro, Analytical or Semi-Preparative pumphead in Stainless Steel or PEEK. S 1130G Low-Pressure Quaternary Gradient Pump The S 1130G Low-Pressure Quaternary Gradient Pump incorporates an active low pressure mixer with adjustable mixing volume. The mixing chamber volume can be freely adjusted. An optional integrated...

Open the catalog to page 3
S 600 - 4

S 5300 Sample Injector System The Sykam S 5300 Sample Injector System is a very flexible and powerful HPLC autosampler with excellent reproducibility and linearity properties. Variable vial racks and adaptors for microtiter plates as well as a multitude of firmware options make this system highly adaptable and suitable for any analytical application. Robust Design Durable X/Y/Z-Sampling The S 5300 Sample Injector System features a mechanically durable X/Y/Z-Sampling-Mechanic designed for long life operation. The self-lubricating bearings keep the routine maintenance at a minimum and avoid...

Open the catalog to page 4
S 600 - 5

Precision & Modularity Technical Specifications Wetted Materials: Sample Capacity: Performance The Sykam S 5300 Sample Injector System offers multiple injection modes depending on application and sample needs. Besides fixed loop overfilling and variable volume injection the instrument offers a Zero-Waste injection mode for injecting very small sample amounts by moving the sample into the middle of the sample loop. Linearity and injection precision can be optimized for any volume by different sample loops and syringe sizes. Stainless Steel / PEEK*, PPS, PVDF 120 (1.5 ml), 192 (microtiter...

Open the catalog to page 5
S 600 - 6

S 3250 UV/Vis Variable Wavelength Detector The Sykam S 3250 UV/Vis Detector is a variable wavelength UV/Vis detector for routine analysis and sophisticated research. The dual lamp design offers a wavelength range of 190 – 800 nm with a low baseline noise. The front-accessible flowcell can be easily exchanged, as well as the lamps which are accessible through a side panel in the instrument housing. Integrated Wavelength Program The S 3250 UV/Vis Detector features a wavelength program to change the selected wavelength over time. With this feature the optimum wavelength can be selected for...

Open the catalog to page 6
S 600 - 7

Technical Specifications Wetted Materials: Baseline Noise: Baseline Drift: Wavelength Range: Wavelength Accuracy: Light Source Deuterium Lamp, Tungsten Lamp Wavelength Program: Analog Output: Control Features: Internal Peak Detector with +24 V solenoid switching output. Dimensions: (W x H x D) Figure: S 3250 Optical Module Stainless Steel / PEEK* Power Supply: Principle of Operation Reference Signal Measuring Signal Beam Splitter Grating Flow Cell Deuterium Lamp Tungsten Lamp Figure: Principle of Operation

Open the catalog to page 7
S 600 - 8

Order Information RESEARCH Isocratic System S 601-S – Analytical – SS* • S 1130 Isocratic HPLC Pump • S 5300 Sample Injector System • S 3250 UV/Vis Detector option: S 1130 – Active Piston Backflushing option: S 5300 – Variable Volume upgrade option: S 5300 – Derivatization upgrade (incl. 10 51 004) option: S 5300 – Heating/Cooling upgrade option: S 3250 – Dual-Wavelength upgrade option: S 3250 – Scanning upgrade (incl. 10 31 009) ROUTINE Isocratic System S 601-P – Analytical – PEEK* • S 1130 Isocratic HPLC Pump • S 5300 Sample Injector System • S 3250 UV/Vis Detector option: S 5300 –...

Open the catalog to page 8

All Sykam catalogs and technical brochures

  1. WEB_S6000

    24 Pages

  2. ASA_Web

    8 Pages

  3. S 500

    8 Pages