• Products
  • Catalogues
  • News & Trends
  • Exhibitions

Ultimaker 2+ Specifications - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

SPECIFICATION SHEET Q PRINT HEAD CABLE BOWDEN TUBE BUILD PLATE ■0 BUILD PLATE CLAMPS -0 BUILD PLATE SCREWS SPOOL HOLDER POWER SOCKET

 Open the catalogue to page 1

SPECIFICATIONS PRINTER AND PRINTING PROPERTIES PHYSICAL DIMENSIONS Print technology Fused Filament Fabrication (FFF) Dimensions (excluding bowden tube and spoolholder) Print head Swappable nozzle Dimensions (including bowden tube and spoolholder) Build volume Nett weight Filament diameter Shipping weight Layer resolution 0.25 mm nozzle: 150 to 60 micron 0.4 mm nozzle: 200 to 20 micron 0.6 mm nozzle: 400 to 20 micron 0.8 mm nozzle: 600 to 20 micron Extrusion speed Print head travel speed POWER REQUIREMENTS 100 - 240 V 4 A, 50 - 60 Hz 221 W max. Output AMBIENT CONDITIONS 0.8 mm nozzle: up to 24...

 Open the catalogue to page 2

SPECIFICATION SHEET PRINT HEAD CABLE BOWDEN TUBE PRINT HEAD BUILD PLATE 5 BUILD PLATE CLAMPS 6 BUILD PLATE SCREWS 8 PUSH/ROTATE BUTTON 9 DISPLAY 12 POWER SOCKET 13 POWER SWITCH 14 USB SOCKET

 Open the catalogue to page 3

SPECIFICATIONS PRINTER AND PRINTING PROPERTIES PHYSICAL DIMENSIONS Fused Filament Fabrication (FFF) Dimensions (excluding bowden tube and spoolholder) Print head Swappable nozzle Dimensions (including bowden tube and spoolholder) Build volume Nett weight Filament diameter Shipping weight Layer resolution Print technology 0.4 mm nozzle: 200 to 20 micron 0.6 mm nozzle: 400 to 20 micron 0.8 mm nozzle: 600 to 20 micron X, Y, Z accuracy Print head travel speed Extrusion speed POWER REQUIREMENTS AMBIENT CONDITIONS 0.8 mm nozzle: up to 24 mm3/s Build plate Heated glass build plate (20° to 100° C) Operating...

 Open the catalogue to page 4