カタログ >
Amico >
Surface Mount Console Unit

Surface Mount Console Unit
1 / 2ページ

カタログの抜粋

General Specifications The console unit shall be an Amico Alert-1 series. The console unit has a removable front assembly for ease of mounting to the structural wall. The console is supported by a galvanized steel back plate which shall be attached to the structural wall in a manner that is appropriate for the material/type of wall (hardware supplied by others). The fascia front assembly is made from extruded, clear anodized aluminium with aluminum end plates, for a clean appearance. The back plate is made from galvanized steel, 0.060" thick. The medical gas piping terminates as capped ends above, bottom or rear of the console box. All specified devices are factory installed in the console backbox. The electrical devices are separated by dividers, but they are not pre-wired. NOTE: Exact dimensions are to be determined by the customer. NOTE: A blank provision should be placed between Medical Gas Outlets and Vacuum Bottle Slide Holders and between 2 communication devices. The Console is UL Listed to U.S. and Canadian safety standards. Amico products comply with NFPA 99. Removable front fascia for ease of maintenance and installation. Single cutout dimension for all accessories (outlets & electrical devices) are on a 2.5" (63.5 mm) centre. Fascia is anodized aluminium with aluminum end plates for a clean, aesthetic appearance.

カタログの1ページ目を開く

Wall Surface Finished Floor Line Model Number E-CON-XXS The Letters "XX" Represent the Number of Gangs Amico Corporation | 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada | 71 East Industry Court, Deer Park, NY ' Toll Free Tel: 1.877.264.2697 | Tel: 905.764.0800 | Fax: 905.764.0862

カタログの2ページ目を開く