ウェブサイト:
BLOCK Technology
カタログの抜粋
Glove Tester Device for glove integrity testing.
カタログの1ページ目を開く
Dimensions Glove Tester Glove Tester Dimensions in mm Width
カタログの2ページ目を開く
The tester is used to test the leak tightness of gloves in oval flanges. This testing is specifically performed for isolators and microbiological boxes. The principle of the leak tightness test consists of testing the pneumatic tightness of gloves: pressurizing them at a set value, reading the pressure loss and evaluating the difference. The mechanical glove tester consists of a base with an inflatable seal along its perimeter, an output for compressed air into the sleeve and an input for the digital pressure sensor. There is also a flange with two buttons for pressurising and deflating the...
カタログの3ページ目を開く
Inflatable seal indicator Pressurized air Inlet Pressure glove inlet/outlet Inflatable seal Inflatable seal inlet/outlet Handle The tester measures a drop in pressure over time. If the pressure drops over the assigned limit an alarm is displayed. A recording of the displayed values must be performed manually as a part of prepared protocol.
カタログの4ページ目を開く
