BioBlock® a Biomechanical and Biological Concept
1 / 8ページ

Human Technology

THE BEST CLINICAL DECISION FOR THE PREVENTION OF PERIIMPLANTITIS AND THE SUCCESS OF IMPLANT TREATMENTS. BioBlock • The prosthesis is joined to the implant by an intermediate transepithelial, screwed into the implant. • The surface of each integral component (implant and transepithelial) is adapted specifically to the different tissues it will interact with. BIOLOGICAL SEAL The bond between the tissue and the transepithelial is established at the moment it is inserted. The prosthesis can be removed easily without damaging this junction, as the prosthetic platform is located at the gingival...

To achieve the biomechanical and biological advantages of the BioBlock® concept, BTI has developed a wide range of transepithelials, available for all platforms of its implant system. SINGLE RESTORATIONS (SCREW-RETAINED) AND COMPONENTS OF CHOICE FOR IMMEDIATE LOADING Internal connection to the prosthesis STRAIGHT UNIT EXPANDED UNIT Same gingival and prosthetic emergence Change in platform for a wider prosthetic emergence Connection with the mplant ANGLED UNIT With rotational components Correction of disparallelisms 17º - 30º Non-rotational connection with the implant STRAIGHT Ø Prosthetic...

WORKFLOW with UNIT® IMPRESSION MAKING DIGITAL IMPRESSION TAKING AND SCANNING COMPUTER DESIGN LABORATORY MODEL CONVENTIONAL MANUFACTURING PROCESS MODEL IMPRESSION AND ANALOGUE INSERTION

MAXIMUM ANGULATION SUPPORTED BY A MULTI-IM® It allows a divergence between implants of up to 56°, making it easier to take impressions and screw in the prosthesis with an excellent passive fit without the risk of stress on the implant or the prosthesis. Multi-Im® TRANSEPITHELIAL MULTIPLE RESTORATIONS (SCREW-RETAINED) AND COMPONENTS OF CHOICE FOR IMMEDIATE LOADING STRAIGHT MULTI-IM Same gingival and prosthetic emergence EXPANDED MULTI-IM Rotating connection to the implant ANGLED MULTI-IM With rotational components Correction of disparallelisms 17° - 30° % ▼ Non-rotational connection with the...

WORKFLOW with Multi-Im® IMPRESSION MAKING DIGITAL IMPRESSION TAKING AND SCANNING COMPUTER DESIGN LABORATORY MODEL CONVENTIONAL MANUFACTURING PROCESS MODEL IMPRESSION AND ANALOGUE INSERTION

How are restorations made on transepithelial abutments? USING CAD CAM TECHNOLOGY LABORATORY MODEL CONVENTIONAL MANUFACTURING PROCESS SQUARE INTERFACE for UNIT STRAIGHT LARGE With the use of a series of aesthetic interfaces that guarantee a perfect passive fit and maximum retention of the restoration. COMPUTER DESIGN AESTHETIC INTERFACE for MULTI-IM STRAIGHT EXPANDED The interfaces allow angulations to be corrected in CAD CAM ( STRAIGHT: 0- 15º / EXPANDED: 0 - 30º) For conventional manufacturing techniques, together with the interfaces, casting sleeves should be used. SURFACE TREATMENTS OF...

BTI Comercial San Antonio, 15 ■ 5° 01005 Vitoria-Gasteiz (Alava) ■ ESPANA Tel: +34 945 140 024 Fax: +34 945 135 203 pedidos@bticomerdal.com B.T.I. Biotechnology Institute S.L. Parque Tecnologico de Alava Leonardo da Vinci ,14 01510 Mlinano (Alava) Espana bti.implantes@bti-implant.es www.bti-biotechnologyinstitute.com NOTE: consult your distributor for the availability of the product in the different markets. BTI APP Nl W PRODUCTS iPhone/smartphone version iPad/tablet version (exclusive content for clients)