ceon
1 / 1ページ

カタログの抜粋

LABELING HEADS // LABEL SENSOR CEON Label sensor 1 to detect particularly thin or transparent label materials When self-adhesive labels are applied automatically, paper or plastic materials are in use depending on the requirement. The range includes particularly thin, transparent or metallized labels. The intelligent CEON label sensor on the labeling head supports reliable identification and precise positioning of all conventional label materials. Good reasons for choosing CEON label sensors by cab • easy assembly directly on the peel-off plate • detection of all label materials at any mesh width • precise detection even at very high dispensing speeds up to 24,000 inches/min Further retainer bars are provided for the IXOR labeling head. • high repeat accuracy • ManualTeach sensor balance independent from the system and by means of AutoTeach directly on the labeling head IXOR • operating voltage 15 to 30 VDC • push-pull output: PNP, NPN, 40 mA, short-circuit proof M12 plug, 4 pins, a-coded Do you have needs, questions or suggestions? Advisory services: labeling@cab.de Sales: labelingspares@cab.de Repair: labelingservice@cab.de For further information see www.cab.de/en Wilhelm-Schickard-Str. 14 76131 Karlsruhe / Germany

カタログの1ページ目を開く