Direct Surgical Guide Kit
1 / 7ページ

Used for a flapless surgery.

Direct Surgical Guide Kit [KDSG002] > Used for a flapless surgery. > Served as a guide for positioning the drill while measuring the thickness of the buccal bone, thereby preventing bone resorption and reducing the burden on the patient. > Stable Drill positions can be guided to various cases by combining different surgical instruments (E.g., Position Guide, Linker and Width Guide). Please fix the depth pin of the Buccal Position Guide to the buccal bone surface 5mm below the gingiva or the alveolar crest. Safe operation is possible by measuring the thickness of the buccal bone in order to...

Select the 1, 2 or 3mm Buccal Position Guide depending on the alveolar bone width and implant diameter to determine the buccal bone thickness. 2. Width Guide > Select the 7, 8, 9, or 10mm-width guide according to the implant crown diameter, mount it on the Buccal Position Guide, and Drill the center of the implant (the size is distinguished by color). Bucco-palatal bone width Fixture diameter Black O-Ring Under 7mm bone width, under Ø4.0mm fixture Ø 3.0 Bucco-palatal bone width Fixture diameter The width guide is used by connecting it with the sleeve of the Buccal Position Guide. Bone Width...

How to use according to the mesiodistal dimension-2 (Use of the combined Width Guides) > Guide the Drill position according to the distance between implant centerlines (7, 9, 11mm). The device consists of three gaps : 3mm, 5mm, and 7mm from the Ø4mm fixture interface. 7mm 8mm 9mm 10mm > In continuous implants, select the 7, 9, or 11mm Position Guide according to the crown size, and mount it on the Buccal Position Guide to drill. Mesiodistal dimension * The Position Guide must be used in combination with the Buccal Position Guide and linker. It cannot guide the Drill position accurately when...

Application of the 9mm Position Guide (when the mesiodistal distance between the two missing teeth is at least 16mm) 5. Point / Crestal Cutter Drill Application of the 11mm Position Guide (when the mesiodistal distance between the two missing teeth is at least 18mm) > A hole is created on the cortical bone in order to facilitate the Initial Drill. > The gingiva residue is removed while flattening the uneven alveolar bone surface. 30.1 Crestal Cutter Point Drill 4. Linker > When you perform prosthesis with a bridge in a continuous implant, connect the 11mm Linker to the position guide and...

Buccal Position Guide Assembly Buccal Position Guide Guide Handle Drill * After connecting the guide handle to the buccal position guide, fix it at the site where the implant will be placed and insert the Guide Drill into the hole inside the Sleeve. Drilling Sequence (Flapless Surgery) Used for a flapless surgery. Crestal Cutter Fixture Installation Guide Drill Final Drill * Form basic holes with a crystal cutter. Then, select a drilling sequence according to the implant diameter. 010 Direct Surgical Guide Kit

Direct Surgical Guide Kit Cowellmedi Co.,Ltd Floor 6, Blue Fin Tower, 42, Seochojungang-ro,Seocho-gu, Seoul, Korea Tel. +82-2-3453-5085 Fax. +82-2-3453-5086 E-mail. cib@cowellmedi.com Cowellmedi USA INC 218 Trianon LN Villanova PA 19085-1442 USA Tel. 1-623-939-1344 Fax. 1-623-939-1472 Cowell R&D Institute 48, Hakgam-daero 221beon-gil, Sasang-gu, Busan, 46986, Korea Tel. +82-51-314-2028 Fax. +82-51-314-2026