InnoGenic™ GBR Kit
1 / 7ページ

An all-in-one solution for various types of GBR procedures.

Cowellmedi Co.,Ltd Floor 6, Blue Fin Tower, 42, Seochojungang-ro,Seocho-gu, Seoul, Korea Tel. +82-2-3453-5085 Fax. +82-2-3453-5086 E-mail. cib@cowellmedi.com Cowellmedi USA INC 218 Trianon LN Villanova PA 19085-1442 USA Tel. 1-623-939-1344 Fax. 1-623-939-1472 Cowell R&D Institute 48, Hakgam-daero 221beon-gil, Sasang-gu, Busan, 46986, Korea Tel. +82-51-314-2028 Fax. +82-51-314-2026

InnoGenic™ GBR Kit [KIGBR001] > An all-in-one solution for various types of GBR procedures. Tenting Screw Drill Tenting Screw Fixing Screw Fixing Screw Drill The length of the product can be measured with the scale marked on the middle tray of the kit. Drill Stopper Tenting Handle Harvesting Drill Driver Handle KIGH Silicon Shield KBHDSS01 1EA assembled with Drill. 5EA packed in the lower tray.

Fixing Screw (Fixing) • Used without removing the Screw Kit from the inside of the kit tray (Remove to use if necessary only). • Used to fix the membrane to the bone. • Place slowly using the Fixing Driver (Machine/Handle). • 3, 5 and 7mm length can be selected according to the bone quality. In hard bone, use after forming a basic drill hole using the Fixing Screw Drill. • The wedge-shaped design is advantageous for self-tapping, allowing it to be fixed without drilling in normal bone. • The double thread shortens the placement time. • Made of special material for autoclaving. * Rotate the...

• Used to fix membrane on the Tenting Screw. • Tightened with the 0.9 Hex Driver. • Recommended tightening torque force : 5~8 N.cm. • Used to fix membrane over the Fix Connector. • For submerged surgery in case of sufficient soft tissue. • Tightened with the 0.9 Hex Driver. • Recommended tightening torque force: 5~8 N.cm. Cover Cap (C/Cap) Membrane Tenting Screw • Used to fix the membrane along with the Cover Cap or Healing Cap after connecting to the fixture. • Tightened with the 0.9 Hex Driver. • Recommended tightening torque force: 12~15 N.cm. • Available for the INNO Submerged,...

Fixing Screw Drill & Tenting Screw Drill Fixing Screw Driver & Tenting Screw Driver (Machine) • Used to place the Fixing Screw / Tenting Screw mainly in hard bone. • Also used to perforate cortical bone when blood supply is required. • For normal bone, drill only 3mm deep if necessary. • Drill before placing the Fixing Screw / Tenting Screw. • Laser-marked at 3, 5 and 7mm long from the tip of the drill and the length can be controllable using the Drill Stoppers. • Color-banded for distinction (Red : Fixing Screw Drill, Blue : Tenting Screw Drill). • Recommended drilling speed : 1,000~1,200...

Harvesting Drill & Drill Stopper • Used to perforate cortical bone when blood supply is required. • Recommended drilling speed : 1,200~1,500 rpm. • Drill for convenient harvesting of autogenous bone in the form of bone chip in a short period of time. • The Silicon Shield of the Ø3.5 Harvesting Drill makes sure with no bone chip loss while drilling (Bone chip can be collected at implant site). • 6 Silicon Shields are included in the Kit (1 is assembled with the Ø3.5 Harvesting Drill and 5 are packed in the lower tray). • The maximum drilling depth of the Ø3.5 Harvesting Drill is 12mm, so it...