カタログ >
Cowellmedi >
MFS Kit (Multi-Functional Sinus™ Kit)

MFS Kit (Multi-Functional Sinus™ Kit)
1 / 6ページ

カタログの抜粋

MFS Kit (Multi-Functional Sinus™ Kit) - 2

MFS KIT [KSA004] > A comprehensive kit to approach direct & indirect maxillary sinus lift simply. Aqua Ratchet Connector Point Ø2.2 Crestal Drill Stopper Crestal Drill Aqua Lifter Aqua Syringe Connector Bone Carrier Aqua Tube Bone Condenser Torque Wrench Depth Gauge Sinus Elevator Lateral Stopper Lateral Drill Side Cutter

カタログの2ページ目を開く

MFS Kit (Multi-Functional Sinus™ Kit) - 3

Crestal Approach - Components 4. Crestal Drill Stopper > Connected with a stopper to be drilled to the same length of the cartilage height of maxillary sinus which is measured by CT. > If not equipped with CT, fasten the stopper one step lower than expected and gradually increase the length. > Use to mark the point of perforation on cortical bone. > In the case of the remaining bone height is as low as 3.5mm, pay more attention when drilling. 3.5mm 7mm Drilling Depth Drilling Depth 2. 2.2 Twist Drill 800~1,000 rpm > Use for making guide hole before using the Crestal Drill. > Connect the...

カタログの3ページ目を開く

MFS Kit (Multi-Functional Sinus™ Kit) - 4

Crestal Approach - Drilling Sequence > Placing implant over Ø 4.0 is highly recommended. > Use the Torque Wrench to fix the Aqua Lifer Drill in the hole formed using Crestal Drill. Code Point Drill > Insert bone graft material using the Bone Carrier. Ø2.2 Twist Drill Soft Bone Ø2.8 Crestal Drill Normal Bone ※ If you need to expand hole, drill 1mm deeper using the crestal drill. Point Drill > After connecting the stopper with the Bone Condenser, Soft Bone elevate bone graft materials to inside of maxillary sinus. > Rotate bone graft material using the Bone Condenser to disperse bone Ø3.3...

カタログの4ページ目を開く

MFS Kit (Multi-Functional Sinus™ Kit) - 5

Lateral Approach - Components > CSE-02 : as stepwise, after using CSE-01, used for elevation of sinus membrane. > Drill after fastening the stopper according to the height of the bone. > Round shape to prevent membrane perforation. > CSE-03 : as stepwise, after using CSE-02, used for elevation of sinus membrane. 2. Ø6 Lateral Round Drill 800~1,000 rpm > Drill after fastening the stopper according to the height of the bone. > Round shaped edge. > When you expand window, must be connected with Stopper. > The residual bone should be replaced in the original position after drilling, sinus...

カタログの5ページ目を開く

MFS Kit (Multi-Functional Sinus™ Kit) - 6

Cowellmedi Co.,Ltd Floor 6, Blue Fin Tower, 42, Seochojungang-ro,Seocho-gu, Seoul, Korea Tel. +82-2-3453-5085 Fax. +82-2-3453-5086 E-mail. cib@cowellmedi.com Cowellmedi USA INC 218 Trianon LN Villanova PA 19085-1442 USA Tel. 1-623-939-1344 Fax. 1-623-939-1472 Cowell R&D Institute 48, Hakgam-daero 221beon-gil, Sasang-gu, Busan, 46986, Korea Tel. +82-51-314-2028 Fax. +82-51-314-2026

カタログの6ページ目を開く