カタログの抜粋
liquid temperature calibration baths Heat Transfer Fluid - Low Temperature The low temperature heat transfer fluid is engineered to offer non-toxic and low odour qualities at an affordable price. This fluid will satisfy the expectations of the most demanding modern day customer by providing an environmentally sound, thermally effective heat transfer fluid with a flash point of greater than 61°C (141°F) or greater. The fluid offers a low viscosity rating and unequalled heat transfer characteristics through its entire operating temperature range. Recommended temperature range -40ºC to 125ºC. When operator safety, environmental impact and price set the benchmark for your next open bath or closed loop heat transfer application, consider FHTFLO. A fume hood is recommended for open baths being operated at temperatures above +50ºC Benefits and features Low viscosity Improves bath uniformity and stability Enhanced heat-up and cool down rates Lower cost than glycol and silicone oil type fluids Safe and non-toxic Convenient 18 Litre (5 US gallon) containers NOTE: This fluid should only be used with the following plastics; Acetal, Aramid Fiber, Chemraz (FFKM), Epoxy, Fluorocarbon (Film), Flouroelastimer, Glass Fibre, Gylon style 3500,3504 & 3510, Kalrez, Kel-F (CTFE), PEEK, Polytetrafluor-ethylene, Teflon (All), Teflon Encapsulated Silicone, Teflon Encapsulated Viton, Teflon Impregnated Fibreglass, Viton, Resin Impregnated Carbon Graphite. Metal Compatibility; Aluminium, Brass, Bronze, Carbon Steel, Cast Steel, Copper, Copper Nickel, Hasteloy, Inconel, Monel, Nickel, Stainless Steel, Tantalum, Titanium. For all other material types contact Techne for specific recommendations. Technical Information Typical Properties – Low Temperature bath fluid Catalog # FHTFLO Appearance Boiling point Composition Fire point Flash point (Closed cup) Flash point (Open cup) Auto ignition temperature Critical temperature (estimated) Critical pressure (estimated) Average molecular weight Dielectric constant Thermal conductivity at 0ºC/68ºF Recommended temp. range open system Recommended temp. range closed system 1 Techne high temperature bath fluid or its vapor, like many other heat transfer fluids, may ignite if released into the environment and exposed to hot surfaces, sparks, open flames, or other source of ignition. Ordering Information FHTFLO
カタログの1ページ目を開くElectrothermalのすべてのカタログと技術パンフレット
-
Circulating Baths
12 ページ
-
Waterproof pHTestrs®
8 ページ
-
Microfluidics
4 ページ
-
Bunsen Burners
1 ページ
-
Masterflex® & Ismatec®
48 ページ
-
Cole-Parmer® New and Best
260 ページ
-
Fluid Handling Sourcebook
116 ページ
-
Lab Essentials
100 ページ
-
BioPharma Processing
131 ページ
-
Fluid Handling Solutions
48 ページ
-
Melting Point Range
2 ページ
-
Digi-Mantles
3 ページ
-
Controllers
6 ページ
カタログアーカイブ
-
TechneWorks
1 ページ
-
Tecal 425F
1 ページ
-
Tecal 425S/H
1 ページ
-
Tecal 650F
1 ページ
-
Tecal 650S/H
1 ページ
-
F0885 Alundum
1 ページ
-
STEM Omni and RS Series
12 ページ
-
ElectroVMV_APR13
1 ページ
-
STEM Integrity 10
1 ページ
-
STEM Omni Reaction
6 ページ
-
Stirrers
7 ページ
-
MU Heating Mantles
8 ページ
-
Electromantle
8 ページ