Erkoform-3d
1 / 2ページ

vacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel • Touchless temperature sensor for exact determination of the actual temperature of the thermoforming material. • No compressed air supply required, plug and play. • Touchless temperature sensor. • No preheating time. • Sudden vacuum, built up before thermoforming process (pat. 19511064). • Much space, also for higher models. • Perpendicular prestretching and forming produces results of even foil thicknesses. • Completely accessible model. • Practical one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. sensor window 3d Touchpanel • The program contains all Erkodent thermoforming materials, has a display conducted operating and signalizes necessary working steps. • Choose type and thickness of foil and start. • The display informs about each operating status and the necessary working steps. • The thermoforming temperature and cooling time shown can be changed for special applications. • New foils can be progammed. • Saftey switch-off after 10 sec. when the next working steps are not executed or if the sensor measures a too high temperature. • Medium wave infra-red radiator with the right wave length for the thermoforming technique. 5 x longer life than short wave infra-red radiators. Technical data: Size: H/W/D 315/350/370 mm Weight: 11.9 kg Foils: Ø 120 mm, thickness 0-6 mm Form pot: Ø 101 mm, inner height 42 mm Electrics: Volts 230 (or 100/115), Watt 340 2 x T-2A (230 V) 2 x T-4A (100/115 V) Heating: medium wave infra-red radiator Volts 230 (or 100/115), Watt 280 Sensor: touchless temperature sensor, measuring range up to 240 °C Vacuum: with pre-vacuum vacuum 0.8 bar, litre capacity 6 L/min noise level < 70 db(A) • Erkoform-3d 188 500 with model disc, granules pot, brush with magnet, centering plate (for Occluform-3, pre-assembled), filling granules (high-grade steel, 1.8 kg) and foil trial package.

Occluform-3 occludator to imprint the opposing bite in the Erkoform-3d (pat. 19915567) • Directly imprint the opposing bite in the Erkoform-3d during the thermoforming process! • The dimensions that are valid at present for articulators have been taken into consideration. • Plaster-free model fixation. • Construction with a single column for best model accessibility. • Metal construction with hydraulic fixation of the opposing bite. • Much space, also for higher models. • Prepared for self-installation. • With detailed instructions for installation and operating instructions. • The...