Dental Model
1 / 2ページ

MATERIAL DATA SHEET Dental Model Dental Model for High-Precision, High-Accuracy Designed for crown and bridge models with removable dies, Dental Model Resin is a high-precision, high-accuracy resin. Print crisp margins and contacts within +/- 35 microns, and removable dies with consistently tight fit. A smooth, matte surface finish and color similar to gypsum make it easy to switch from analog to digital model production. To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

1 Material properties can vary with part geometry, print orientation, print settings, and temperature. 2 Data was obtained from green parts, printed using Form 2, 100 pm, Dental Model settings, washed and air dried without post cure. 3 Data was obtained from parts printed using Form 2, 100 pm, Dental Model settings, and post-cured with 1.25 mW/cm2 of 405 nm LED light for 60 minutes. G = Good resistance. Parts exposed to this solvent should not experience a decrease in mechanical properties. (< 1% weight gain, < 1% width increase over 24 hours for a 1 x 1 x 1 cm cube) X = Unacceptable...