カタログ >
Genstar Technologies Company >
Medical Gas Control Panel

Medical Gas Control Panel
1 / 2ページ

カタログの抜粋

MEDICAL GAS CONTROL PANEL Aluminum front panel for ease of maintenance Inlet and outlet display gauges in psi / kPa High flow capacity Manual shut-off valve Outlet supply pipe for additional remote outlets Maximum inlet pressure: 300 psi Medical gas control panel(s) shall be manufactured by Genstar Technologies Co., Inc. (GENTEC®), in an ISO 13485 certified facility. The control panel shall be oxygen cleaned and tested in strict accordance with NFPA 99. The gas control panel shall be supplied with a quarter turn shut-off stainless steel ball valve, rated at no less than 300 psi. Two 0-400 psi 2” diameter pressure gauges shall be provided to monitor both inlet and outlet pressures. The control panel shall come with a pressure regulator, adjustable between 0 to 300 psi. The DISS outlet shall be a Diameter Index Safety System for Air or Nitrogen outlet for pressure above 200 psi. Customized outlet connections are available. The outlets shall be used for connections to pneumatic surgical tools. The gas control panel shall be factory piped and 100% tested. All components shall be panel mounted on the front panel.

カタログの1ページ目を開く

Note: All dimensions are reference. ORDERING INFORMATION GCP200 - N Nitrogen Control Panel, DISS Connector GCP200 - A Air Control Panel, DISS Connector Technology for a Better Future GENSTAR TECHNOLOGIES Genstar Technologies Company Inc. Copyright © 2010, Genstar Technologies CO., Inc.

カタログの2ページ目を開く