LEDI® 7 Indoor / Single face
1 / 2ページ

LEDI® 7 Indoor / Single face Professional LED clock, robust and stylish combining the best of the technology for an easy installation and operation. Time setting The professional LEDI® clocks can display the same time information, synchronized by a master clock or a time server. On standalone and pulse version, the time setting is manual. Display date and time alternately Internal time base The LEDI® clock has its own temperature compensated TCXO time base which allows an accuracy about 0.1 sec / day between 0° to 40°C in case of synchronization loss. Security Backup of time information in case of mains absence, by lithium battery: 10 years. Specifications Power supply (following version) 230VAC 50/60Hz 115VAC 50/60Hz Low voltage 12, 24 or 48 VDC NTP Version: PoE (Power over Ethernet) Maximum consumption Display: 5 min CPU: 5 min Power supply: 5 min Weight Dimension Digit height Maximal distance of legibility Operating temperature Electrical equipment classification Perfectly silent, direct and accurate reading of time. SMD bi-colour LED technology allows to change the display colour in red, green or yellow (optional white or blue) The patented technology of the light guide provides a perfect regularity of the brightness and viewing angle at 160 ° The front face of the LEDI® is coated with an antiglare and anti-scratch film giving an extraordinary 60000 : 1 level of contrast. A protection against over-voltage and industrial interference via EMC filter An easy "plug and play" installation An anodized aluminium case wall mount or flush mount Its participation in the sustainable development life span over 20 years. 2 years warranty Up to 10 brightness levels for optimal viewing Remote and batch configuration via the optional "remote configuration" software Selection of colours (independently between wave and numbers) and brightness Behaviour of central dots (fixed, blinking…) Advanced version (option K) • Synchronisation of up to 4 NTPv4 servers and setting of advanced NTP options (poll rate / burst / preference order) • Time zone selection and automatic summer/winter time change • Supervision by SNMP v1, V2c, v3, SYSLOG, Consultation of event logs • Configurations accessible via http and/or https • Possibility of changing the display colour according to events (e.g. a loss of synchronisation changes the display colour to red) • IPv4 / IPv6 protocoles • 12h or 24h Mmode • Stopwatch/timer: advanced options fully configurable and programmable (start time, end time, colour change...), control and configuration via web page, GTCHRONO or SNMP • Sensor*: Option to manage up to 3 different SNMP sensors (Temperature, Hygrometry, …) *Within the limits of the display Standard Version (option N or W) • Synchronisation of up to 3 NTP servers • Time zone selection and automatic summer/winter time change • Supervision by SNMP v1, v2.c • Configurations accessible via http and/or https • IPv4 / IPv6 protocoles • Stopwatch/timer: simple option (triggering of a count sequence or countdown by button via web page or SNMP) • Sensor: option to manage an SNMP Temperature or Humidity sensor Hour/minute: 70 mm 35 meters -20° to +50°C Class 1 (in 115 or 230 VAC) Class 3 (in 12, 24, 48 VDC or PoE) Display / LED characteristics Storage conditions Maximum cumulative duration Single row LED display, SMD technology, reading angle: 160° bi-colour (red, green) LED Monochrome LED ● Red: 245 mcd ● Blue: 625 mcd ●Yellow ● Green: 780 mcd ○ White: 625 mcd The product must be switched on for 4 hours every 3 months to maintain its characteristics*. *see user guide for more information Synchronisation inputs • • • • • • • • • TCXO Quartz Standalone DCF77 (EUROPE) with antenna or DCF24V with pair cable GPS Reverse parallel minute receiver 24V or 1/2 reverse minute series AFNOR NFS 87500 or IRIG B (to specify at purchase order) ASCII RS232, ASCII RS422/485 Standard NTP (Option N) or advanced NTP (Option K) Ethernet 10/100BaseT Standard NTP Wi-Fi (IEEE 802.11 a/b/g/n standards 2.4 Ghz) SMPTE

LEDI® 7 Indoor / Single face ITEM CODE N360 VERSION Standalone: radio-synchronisable quartz time base 3.6864 MHz Holdover +/- 0.1 sec/24 h (between 0 and 40°C) DCF Radiosynchronisation. DCF Antenna + 4m cable (1) DCF 24Vdc Synchronisation (Synchro in telecom pair cable) GPS Radiosynchronisation. GPS Antenna + 10m cable 6mA/24V reversed parallel minute pulses receiver clock Serial reversed 1/2 minute pulses receiver clock Consumption 1.25V. 60 to 120mA. 39 ohms shunt (2) AFNOR NFS 87500 Receiver SMPTE-EBU Receiver ASCII RS 232 Receiver ASCII 422/485 Receiver ADVANCED NTP Synchronisation...