INDLAB FUME HOOD
1 / 8ページ

INDLAB FUME HOOD HOTTE INDLAB INDLAB SORBONNE

INDLAB The Indlab model was developed to carry out tests with dangerous products, guaranteeing a high reliability in its operation. It always ensures a laminar flow velocity in the inner chamber (working area), avoiding turbulence and the possibility of escaping dangerous gases. This is the premium model of Industrial Laborum, being an INDLAB Fume Hood certified according to EN 14175-2 and EN 14175-3 by TÜV Nord® Developed according to standards: EN 14175-1 - Chemistry Fume Hoods - Part 1: Definition and Dimensions EN 14175-2 - Chemistry Fume Hoods - Part 2: Performance and Safety Requirements...

LINE LINHA GAMME This model was developed into a line, which presents different possibilities, according to the normes (EU / US) and user needs, being one of the more complete lines in the market. Este modelo desenvolveu-se numa linha, que apresenta diferentes possibilidades, consoante as normas (EU/US) e necessidades do utilizador, sendo uma das linhas mais completas do mercado. Ce modèle a été développé en une ligne, qui présente différentes possibilités, en fonction des normes (EU / US) et des besoins des utilisateurs, étant l’une des lignes les plus complètes du marché. STAINLESS STEEL...

INDLAB FUME HOOD High performance chemistry dish designed for use in laboratories that pose high risks to users and the environment. The INDLAB Fume Hood consists of: - Exterior body consists of panels made of sheet steel coated with epoxy-polyester resins of high chemical resistance. It serves to support the work surface and the inner body of the hood. In the back space of the bench there is a technical zone where connections to the water, sewage, gas and electricity networks are made; - Inner housing - Made of various materials with high chemical resistance. It has aerodynamic elements to...

TECHNICAL SPECIFICATIONS ESPECIFICAÇOES TÉCNICAS SPÉCIFICATIONS TECHNIQUES Dimensões Dimensions Standard services* * Serviços standard Services standard* 2/3 schuko-type outlets (type F), 230V, protection class IP55** Two cold water valves and one natural gas valve, with the respective taps. One Drip Cup fixed in the service panel or undermounted on the worktop. 2/3 tomadas do tipo schuko (tipo F), 230V, classe de proteção IP55** 2/3 sorties de type schuko (type F), 230V, indice de protection IP55 ** Duas válvulas de água fria e uma válvula de gás natural, com as respectivas torneiras. Deux...

MATERIAIS E CODIFICAÇÃO MATÉRIEL ET CODIFICATION STEEL SHEET CHAPA DE AÇO TÔLE D'ACIER STEEL SHEET CHAPA DE AÇO TÔLE D'ACIER STEEL SHEET CHAPA DE AÇO TÔLE D'ACIER COMPACT LAMINATE COMPACTO FENÓLICO PHENOLIC COMPACT POLYPROPYLENE POLIPROPILENO POLYPROPYLÈNE STAINLESS STEEL AÇO INOX ACIER INOXYDABLE TECHNICAL CERAMIC GRÉS CERÂMICO CÉRAMIQUE TECHNIQUE POLYPROPYLENE POLIPROPILENO POLYPROPYLÈNE TECHNICAL CERAMIC GRÉS CERÂMICO CÉRAMIQUE TECHNIQUE TECHNICAL CERAMIC GRÉS CERÂMICO CÉRAMIQUE TECHNIQUE STAINLESS STEEL AÇO INOX ACIER INOXYDABLE TECHNICAL CERAMIC GRÉS CERÂMICO CÉRAMIQUE TECHNIQUE...

STRONG ACIDS Standard Indlab Fume Hood for a generalized use of chemical material; exterior in cold-rolled steel sheet, inner linning and worktop in different materials. For a more intensive use of chemical materials it is recommended that the interior and the worktop be in ceramic stoneware, for a better performance of the fume hood over time. Indlab Fume Hood for flammable chemical materials; exterior in cold-rolled steel sheet, inner linning and worktop in stainless steel. It’s a Fume Hood advised for those who intend to work with materials from petroleum and some explosive powders, being...

sede Rua Alfredo Cunha, nº155, Loja 34 4450-023 Matosinhos Portugal instalações fabris Sobreiro Torto, Branca - Apt. 187 3854-909 Albergaria-a-Velha Portugal T +351 234 529 500 F +351 234 525 263 delegação comercial Rua Professor Mernâni Cidade 11b 1600-631 Lisboa , Portu