カタログ >
Ivoclar Vivadent >
3s PowerCure

3s PowerCure
1 / 12ページ

カタログの抜粋

The product system for esthetic posterior restorations The art of efficiency • ■ ivoclar ’■ vivadenl: passion vision innovation

カタログの1ページ目を開く

The art of efficiency 3s PowerCure offers a fully coordinated range of products for long-lasting composite restorations of Class I and II cavities in the permanent posterior dentition. Harness the power of a complete product system with Adhese® Universal single-component universal adhesive, Tetric® PowerFill sculptable 4-mm composite and Tetric® PowerFlow flowable 4-mm composite. Light-cure these components in 3 seconds from the occlusal surface using the intelligent Bluephase® PowerCure curing light. You will notice the time savings – whilst achieving the same quality and esthetics....

カタログの2ページ目を開く

All the products for direct restorative procedures are optimally coordinated with each other and help you increase your workflow efficiency – without compromises in esthetics. Effective isolation with OptraGate®, cotton rolls and saliva ejector 2 Bond Direct intraoral application of Adhese® Universal with the efficient VivaPen® Tetric® PowerFill is a sculptable and Tetric® PowerFlow a flowable 4-mm composite with light-curing times starting from 3 seconds for posterior restorations Bluephase® PowerCure enables intelligent and quick curing times starting from 3 seconds with a light intensity...

カタログの3ページ目を開く

Natural esthetics in the posterior region Would you rather opt for low translucency and esthetic results or high translucency and high depth of cure? The 4-mm composites Tetric PowerFill and Tetric PowerFlow combine the advantages of both properties so you can have both: esthetics and efficiency without dilemma. Brown discolouration Tetric EvoCeram® The highly reactive, patented light initiator Ivocerin® has paved the way for the development of Tetric PowerFill and Tetric PowerFlow for esthetic posterior restorations. Conventional composites designed for the placement of large increments...

カタログの4ページ目を開く

The Aessencio® technology presents a milestone in the esthetic optimization of 4-mm composites. The material features a high initial translucency to be able to cure to the desired depth of cure. Whilst polymerizing, it gradually changes to a more opaque shade. In the case of Tetric PowerFlow, the final translucency is below 10% – a value that is very close to that of natural dentin. This allows stained tooth structure to be concealed effectively. The in-vitro test demonstrates the effect of the Aessencio technology: The black lines under the Tetric PowerFlow sample are clearly visible...

カタログの5ページ目を開く

Higher process reliability due to fewer increments As they enable a streamlined application protocol, Tetric PowerFill and Tetric PowerFlow are less technique sensitive than conventional composite resins. The reason: Increased layer thicknesses of up to 4 mm1 are possible. This means fewer working steps and therefore fewer possibilities for errors. reduced risk for application errors reduced risk for process-related air entrapment maximum layer thicknesses recommended for Tetric PowerFill and Tetric PowerFlow have been increased from 2 mm (conventional treatment protocol) to up to 4 mm....

カタログの6ページ目を開く

Light polymerization is seen as the most common source of error in direct restorative treatments. An efficient polymerization protocol that minimizes the curing time to the shortest possible length reduces the risks inherent in the light-curing step and increases the quality of the final restoration. All shades of the Tetric family of products can be cured with the same exposure times if the same light intensity is used. Bluephase PowerCure curing light all restorations in Class I - V cavities indirect restorations e.g. IPS Empress® Direct, Tetric-Line e.g. IPS Empress Direct, all direct...

カタログの7ページ目を開く

Same performance as conventional composite restorations Although they are applied in 4-mm increments and light-cured with significantly reduced curing times, Adhese Universal, Tetric PowerFill and Tetric PowerFlow result in only minimal polymerization shrinkage, excellent marginal adaptation and low heat development. Their physical properties have been shown several times to be on a par with those of conventional composites placed using a more complicated incremental method. 1 Reliable curing results Surface hardness [%] 3 sec 10 sec Tetric® Tetric® PowerFill EvoCeram Bulk Fill 10 sec...

カタログの8ページ目を開く

5 Excellent marginal adaptation Etch & Rinse Percentage of perfect margin in enamel after thermocycling when using Adhese Universal [%] Source: Dr Uwe Blunck, Charité Berlin, Germany, 2018 See how it works! Read the science behind at: www.ivoclarvivadent.com/3s_Science_en Source: Dr Cesar Arrais, State University of Ponta Grossa, Paraná, Brazi

カタログの9ページ目を開く

PowerFill and Tetric PowerFlow compared with Tetric EvoCeram and Tetric EvoFlow; data available on request Save up to 57% on time in the posterior region 1 Tetric PowerFill and Tetric PowerFlow enable you to place restorations in fewer increments, allowing less toing and froing of materials, instruments and curing devices – whilst achieving the same or even better treatment results compared with conventional layering techniques. This means: You can increase your dental workflow efficiencies and you will notice it. Fewer steps thanks to 4-mm increments: Fill Time savings Experience the...

カタログの10ページ目を開く

Delivery forms Bluephase PowerCure & System Kit Syringe – Article No. 668253 1x Bluephase PowerCure 100-240V with System Kit: 1x 3 g syringe Tetric PowerFill IVA, 1x 2 g syringe Tetric PowerFlow IVA, 1x 2 ml Adhese Universal VivaPen Bluephase PowerCure & System Kit Mixed – Article No. 691918 1x Bluephase PowerCure 100-240V with System Kit: 20x 0.2 g Tetric PowerFill IVA, 1x 2 g syringe Tetric PowerFlow IVA, 1x 2 ml Adhese Universal VivaPen Tetric PowerFill System Kit Syringe – Article No. 692419WW 1x 3 g syringe Tetric PowerFill IVA, 1x 2 g syringe Tetric PowerFlow IVA, 1x 2 ml Adhese...

カタログの11ページ目を開く