カタログ >
Ivoclar Vivadent >
Bluephase® Style

Bluephase® Style
1 / 12ページ

カタログの抜粋

Efficient Esthetics Very small cures all • ■ ivoclar '■ vivadenl: passion vision innovation

Reliable curing, short exposures The innovative Bluephase® Style is designed for the intraoral polymerization of light-curing dental materials. The Bluephase® curing lights are not only the best-selling LED polymerization lights in Europe , but they are also used in numerous clinical studies. Your advantages: Reliable curing performance for direct and indirect restorations Short curing times starting from 2 5 seconds due to high light intensities Suitable for every light-curing material due to polywave LED Wide 10-mm light guide for time-saving single-exposure curing procedures See here for...

カタログの2ページ目を開く

Contactless battery charging Simple two-button operation Ergonomically designed to fit comfortably in every hand Europe’s number based on sales figures, according to KeyStone, 2017 only in conjunction with the Bluephase Style 20i warranty on battery: 1 year

カタログの3ページ目を開く

Esthetics are impossible without proper light curing The evolution of esthetic tooth-coloured composite resin fillings and indirect ceramic restorations would have been impossible without the development of suitable light-curing devices. Polymerization is considered to be the most common source of error when processing light-curing materials. Inadequate polymerization can lead to suboptimal outcomes as well as postoperative sensitivity and discolouration. The curing lights of the Bluephase family can mitigate these risks.

カタログの4ページ目を開く

1 Isolate Effective isolation with OptraGate®, cotton rolls and saliva ejector 2 Bond Direct intraoral application of Adhese® Universal with the efficient VivaPen® Direct Tetric Evo-Line – One solution for all cavity classes Reliable and fast curing with the Bluephase® curing units Indirect Esthetic restorations made of IPS e.max®, optimally cemented with Variolink® Esthetic Products that are optimally coordinated for direct restorative procedures enhance the efficiency with which highquality esthetic restorations can be achieve

カタログの5ページ目を開く

Reliable curing performance for direct and indirect restorations Bluephase Style 20i is a high-performance light that combines maximum power with extremely short curing times. Providing a light intensity of 2,000 mW/cm2, the light-curing unit is especially suitable for polymerizing luting composites in indirect restorations, alongside conventional curing applications in direct restorations. The high light intensity ensures that enough energy passes through the crown or inlay if the restoration is made of highquality all-ceramic material, such as IPS e.max® or IPS Empress®, and this without...

カタログの6ページ目を開く

Polywave LED ensures maximum material compatibility If and how well a dental material polymerizes depends, among other things, on the light emitted. In contrast to the LED lights of the second generation, the purpose-designed Polywave® LEDs cover the entire wavelength range between 385 and 515 nm. This means that the two light-curing units Bluephase Style and Bluephase Style 20i are suitable for curing all current dental photoinitiators and materials without limitations. range acc. to manufacturer’s indications. Status August 2018. * not registered trademarks of Ivoclar Vivadent AG. Source:...

カタログの7ページ目を開く

Effective energy transmission, combined with a light intensity of 2,000 mW/cm2, are the features of the Bluephase Style 20i that enable users to use extremely short curing times of only 5 seconds. Providing a light intensity of 1,200 mW/cm2, the Bluephase Style light-curing unit facilitates similarly short curing times of only 10 seconds. In this way, these light-curing units support time-efficient and therefore economically effective work routines. All composite versions of the Tetric Evo and IPS Empress Direct lines are designed to require the same exposure times. This applies equally to...

カタログの8ページ目を開く

Wide 10-mm light guide for time-saving singleexposure curing procedures A wide 10-mm light guide enhances the curing efficiency of the Bluephase Style. Large areas are completely illuminated thanks to the large diameter of the guide tip. Large restorations, e.g. MOD fillings, can be cured in one shot; time consuming multiple exposures are no longer required. Single-shot exposure Bluephase® Style Multiple-shot exposure Unit with 8-mm light guide Removable and autoclavable, the light guide clearly stands out from that of conventional curing lights. The light guide is shortened at the tip and...

カタログの9ページ目を開く

Delivery forms Technical data Technical data Bluephase® Style Light intensity Every hand (ergonomic design) Every material (wavelength range) Every indication (continuous operation for at least 10 min) (HIGH POWER) Every time (Click & Cure: optional mains operation) Curing modes HIGH POWER TURBO Curing time for selected composites 2 mm | Tetric EvoCeram / IPS Empress Direct 4 mm | Tetric Evo Ceram Bulk Fill / Tetric EvoFlow Bulk Fill Power supply Contactless charging via lithium-polymer battery, capacity: approx. 20 min; charging time: approx. 2 h 120 g (including battery and light guide)...

カタログの10ページ目を開く

Delivery forms Product Bluephase Meter II Measuring range Bluephase Meter II Wavelength range Light intensity Circular light guides LED attached to the front Measuring accuracy 300 – 12,000 mW/cm2 Ø 6 – 12 mm, value measured in mW/cm2 & mW Ø 5 – 13 mm, value measured in mW ± 10 % (compared with integrating sphere) Technical data Bluephase Meter II Operating voltage Power supply (batteries incl.) Warranty Light intensity can be monitored Generally, optical devices such as curing lights are susceptible to contamination and damage of all kinds. In order to ensure an adequate cure at all times...

カタログの11ページ目を開く