KONE MaxiSpace
1 / 12ページ

Dedicated to People Flow KONE MaxiSpace™

More space in the car. More space in the building. KONE MaxiSpace™ is built especially for existing buildings, either to replace an existing elevator or to install an elevator where there wasn’t one before. It is based on KONE’s innovative technology that eliminates the counterweight. This is made possible by our new roping arrangement, combined with the very compact KONE PowerDisc™ motor. Since there is no counterweight, the KONE MaxiSpace™ can increase the usable car space in the elevator by up to 50%. Or, with the same sized car, the KONE MaxiSpace™ requires a shaft one-third smaller...

Full replacement of an existing elevator: More car space in the same shaft KONE MaxiSpace™ increases the space in the elevator car by 50%. So, if the existing elevator can carry four people, the KONE MaxiSpace™ solution could carry six. This increased car size provides more convenient building access, allowing easier transportation of pushchairs, wheelchairs, furniture and other large objects. Extra room and an extra floor The KONE MaxiSpace™ requires no machine room, so you can get more usable space in the building. It can also serve the whole building – including the attic or the...

Motor output power (kW) Main fuse size (A) Typical energy consumption (kWh/y) Elevator Machinery Weight (kg) More space. Less energy. In the long run, one of the largest costs of an elevator is the energy needed to run it. This makes the KONE MaxiSpace™ a very economical solution. Powered by the eco-efficient KONE PowerDisc™, it consumes about half as much energy as a conventional hydraulic or traction elevator. You can save even more energy with additional eco-efficient solutions, such as LED lights and standby solutions that turn off the lights when the elevator is not in use. A typical...

KONE MaxiSpace™ planning information KONE MaxiSpace™ Speed Load DD/WD min. (Slim doors, Recess=0) DD/WD min. (Slim doors, Recess=60) DD/WD min. (Folding/Swing doors) BB/WW min. Floors max. A side Entrances max. Travel max. Pit min.* Headroom min.* Default delivery for loads between 320kg and 480kg is roping 6:1 (both speeds available). *Minimum pit depth and head rooms are dependant upon car size BB = car width DD = car depth WW = shaft width WD = shaft depth Door types and minimum shaft dimensions KONE ReNova™ Slim L3/C3 4-panel centre opening door KONE AMDV L1/C1 2-panel centre opening...

Car Interiors Spring M3110 Ceiling: LF85 Signalisation: KSS 420 Mirror: Partial height, rearwall Handrail: HR53 Walls: Castellance Aluminium AL2 Floor: Detroit Grey RC5 Skirting: None Summer M3120 Ceiling: LF85 Signalisation: KSS 420 Mirror: Partial height, rearwall Handrail: HR53 Walls: Savannah Ivory AL1 Floor: Detroit Grey RC5 Skirting: None Autumn M3131 Ceiling: LF86 Signalisation: KSS 420 Mirror: Partial height, rearwall Handrail: HR53 Walls: Savannah Ivory AL1 Floor: Dallas Black RC6 Skirting: None Winter M3141 Ceiling: LF86 Signalisation: KSS 420 Mirror: Partial height, rearwall...

Car Interiors Spring M7110 Ceiling: LF85 Signalisation: KSS 470 Mirror: Full height, rearwall Handrails: HR53 Walls: Washington Cherry L13 Floor: Bianco Perla SF5 Skirting: Asturias Satin F Summer M7120 Ceiling: LF85 Signalisation: KSS 470 Mirror: Full height, rearwall Handrails: HR53 Walls: Langkawi Grey L34 Floor: Bianco Perla SF5 Skirting: Asturias Satin F Autumn M7131 Ceiling: LF86 Signalisation: KSS 470 Mirror: Partial height, rearwall Handrails: HR53 Walls: Malibu Bronze L32 Floor: Bianco Perla SF5 Skirting: Asturias Satin F Winter M7141 Ceiling: LF86 Signalisation: KSS 470 Mirror:...

matrix display) matrix display) Maintenance Access Panel The interfaces for maintenance and rescue operations are integrated in a surface- mounted cabinet, which is fixed remotely on the shaft wall. The panel comes in a stylish Asturias Satin (F) finish. KONE Voice Link™ - KONE Remote Monitoring Services™ Whenever signalisation is modernised, it comes equipped with KONE Voice Link™, which gives elevator passengers round- the-clock, two-way voice communication with the KONE Customer Care Centre. Thanks to automatic transmission of the equipment location, our operator is able to dispatch the...

Car Interior Ceilings Finishing of the ceilings is Asturias Satin F stainless steel. LF85 Cyprus Solis – surface mounted lamp with fluorescent tube LF86 Astra Perpetua – LED spot lights All ceilings can be used also with a trap door. New ceilings come with 4 LED spots providing the same luminance Handrail Handrail is available on rear wall and side walls. Handrail can be used with all mirror types. HR50 made of aluminium, with straight ends HR51 made of stainless steel, with straight ends HR53 made of stainless steel, with rounded ends (EN 81-70). HR54 made of wood, with straight ends...

Car Interior materials Walls Composite aluminium Stainless Steel Wood veneer Floor Rubber Composite stone Wood laminate

KONE provides innovative and eco-efficient solutions for elevators, escalators, doors, loading bays and Head Office access. We support our customers every step of the way; from design, KONE plc, global house, Station place, KONE is a global leader in helping our customers manage the smooth Regional Offices flow of people and goods throughout their buildings. KONE plc, unit 6, Elmwood, chineham Business park, Basingstoke, present in all KONE solutions. This makes us a reliable partner KONE plc, argil Lift Works, 86 Broad Street, glasgow g40 2pX building. We challenge the conventional wisdom...