IS-II Active Fantastic surface
1 / 16ページ

Fantastic surface, Bioseal, and Perfect achievement of CMI f ixation. No residual acid and cytotoxicity were observed in the surface examination.

IS-II active Product Catalog Contents S.L.A. Surface of IS-II active Features of IS-II active IS-II active Line up Prosthetic Flow Chart IS-II active Drilling Sequence

S.L.A. Surface of IS-II active S.L.A. (Sandblasting with Large grit and Acid etching) IS-II active Surface Macropore & Micropore Macropores and micropores formed by S.L.A. surface treatment increase B.I.C.(Bone-Implant Contact) and allow better blood flow on the implant surface. S.L.A. surface is formed by undergoing the process of sandblasting with smaller than 50㎛ HA (Hydroxy Apatite) particles to roughen the machined surface and to form many macropores. After sandblastingand acid etching is done to increase B.I.C. and promote cell’s activity. With this process, the typical treatment...

S.L.A. Surface of IS-II active Roughness of IS-II active Regular roughness / R.A. 2.0 (Roughness Average) Other company’s S.L.A. Surface Cell adhesion capability of S.L.A. Surface It is observed that S.L.A. surface has the capability of attaching more cells on the titanium surface than the machined or R.B.M. surfaces. Measured distance of newly formed bone Measured distance of newly formed bone is approved to be longer in S.L.A. surface compared to R.B.M. surface. Distance of newly formed bone Left : 1.976mm/ Right : 2.35mm F : Fixture / BM : Bone Marrow / NB : New Bone Distance of newly...

Features of IS-II active Based on the accumulated clinical cases and studies over 10 years, IS-II active has been continuously developed for the improvement. IS-II active has an internal submerged type design with S.L.A. surface that allows faster and stronger osseointegration. BioSeal(0.5mm) BioSeal is a curved S shape placed at the top of the fixture broadens the surface and increases the attachment of the soft tissue, therefore minimizes the bone loss. Straight–Taper Body helps implant to be drilled and inserted smoothly and also self-compaction is easily achieved in the soft bone....

Features of IS-II active Connection of IS-II active Conical Sealing & Internal Hex Structure 22 - Group A : IS-II active all Narrow, Regular, Wide 7.3mm Fixture - Group B : IS-II active Regular, Wide 8.5, 10.0, 11.5, 13.0mm Fixture IS-II active Fixture is compatible with all abutments of IS system. * In order to increase the strength of fixture body, Internal hex of Group A is designed 0.4mm higher than Group B. Fixture Placement Procedure Take the fixture out from the box Remove the package surrounding the fixture Connect the fixture to the driver Take of the back seal Take out the holder...

IS-II active Fixture Line Up Narrow Ø 3.5 Ø 3.5 Product Code Product Code Product Code Actual Size Product Code Actual Size Actual Size Actual Size

IS-II active Fixture Line Up S-wide Platform Product Code Short Platform * S-Wide Kit is necessary to place S-wide Fixture and Ø 5.5 Short Fixture

Prosthetic Flow Chart Solid Abutment Plastic coping Healing abutment Solid abutment Cover screw IS-II active

Prosthetic Flow Chart Cement & Screw Abutment SCRP multi SCRP multi Non-hex Abutment positioner Plastic coping SCRP multi SCRP multi Healing abutment SCRP multi Abutment positioner Cover screw Impression coping positioner IS-II active

IS Full Kit This kit can be used to perform implant surgery for IS-II active, IS-II and IS (Ø3.5 ~ 5.5). For S-wide (Ø6.0 ~ 7.0) implant surgery, S-wide kit is additionally required. Point Lindemann drill Surgical Drill Hex Driver Fixture Driver Product Code IS Full Kit User Manual 1. Follow the guidelines marked in different colors on the kit tray when placing the fixture. Drill sequentially in order to place the implant properly. Ex) When placing Ø4.5 Implant Ø2.3/LD Drill >> Ø2.2 Drill >> Ø2.9 Drill >> Ø3.4 Drill >> Ø3.9 Drill 2. Counter sinking for IS or profile tapping for IS-II...

IS Full Kit Components Direction Pin Surgical Drill Diameter Point Lindemann Ratchet Connector Type Contra Angle Ratchet (Short) Ratchet (Long) Hex Driver Counter sink Diameter Drill Extension Torque Ratchet Depth Gauge

IS Full Kit Components Surgical Drill >> * Function of Point Lindemann Drill 1. Point Drilling - Marking drilling position (Drill 4~5mm) 2. Cutting Side – Controlling path while drilling the extraction site All drills are coated with black color in order to make operator easy when checking the drilling depth. Twist drills have specially designed round tip. * The actual drilling depth of Point Lindemann Drill and Ø 2.2 Initial Drill are 1.3mm longer than the marked length. Stopper Length Drilling Length Drilling Length The actual length of drill is longer than the indicated length. (Tip...

IS-II active Drilling Sequence IS-II active Fixture Ø3.5 X 10mm (D1/D2 bone) Point Lindemann Ø2.3 * Drilling Speed & Torque Point Lindemann, Initial Drill, Twist Drill : 1,200 R.P.M / 30 ~ 45 Ncm Profile Tap : 50 R.P.M / 50Ncm ※ If the bone density is low and soft, drilling 10mm with Ø 2.3 Lindemann drill and then place the fixture. IS-II active Fixture Ø4.0 X 10mm (D1/D2 bone) Point Lindemann Ø2.3 ※ If the bone density is low and soft, drill 10mm up to Ø 2.9 Twist drill and then place the fixture. IS-II active Fixture Ø4.5 X 10mm (D1/D2 bone) Point Lindemann Ø2.3 ※ If the bone density is...

Neobiotech Co., Ltd. E-Space #1010, 212-26, Guro-dong, Guro-gu, Seoul, Koea 152-789 Tel : +82-2-582-2885 Fax : +82-2- 864-2894 Email : info@neobiotech.co.kr