One plus
1 / 16ページ

カタログの抜粋

One plus - 1

Orthoses for people with specific needs

カタログの1ページ目を開く
One plus - 4

UPPER LIMBS ||Wrist support with rigid palmar and thumb splints Memory foam Antibacterial fabric Rigid elements combination Breathable fabric ||Characteristics Wrist support with palmar and thumb splints made from semi-rigid three-layer material. Its design can adapt to morphologies in which an exaggerated perimeter discrepancy exists between the wrist and the forearm. Both splints are pre-moulded and the palmar splint is made from aluminium with a special alloy that is harder and more resistant to high mechanical impacts. It also features rigid dorsal supports and an inner protective pad...

カタログの4ページ目を開く
One plus - 5

||Wrist support with rigid palmar splint Memory foam Antibacterial fabric Rigid elements combination Breathable fabric ||Characteristics Wrist support with palmar splint made from semi-rigid three-layer material. Its design can adapt to morphologies in which an exaggerated perimeter discrepancy exists between the wrist and the forearm. The palmar splint is pre-moulded and made from aluminium with a special alloy that is harder and more resistant to high mechanical impacts. It also features rigid dorsal supports. The outer layer of the fabric has high mechanical strength while the...

カタログの5ページ目を開く
One plus - 6

||Wrist support with rigid thumb splint Memory foam Antibacterial fabric Rigid elements combination Breathable fabric ||Characteristics Wrist support with thumb splint made from three-layer semi-rigid base fabric. Its design can adapt to morphologies in which an exaggerated perimeter discrepancy exists between the wrist and the distal third of the forearm. It features an internal protection pad in the thumb area for comfortable use. The outer layer of the fabric has high mechanical strength while the intermediate foam has a shape memory capacity, enabling pressures to be distributed and...

カタログの6ページ目を開く
One plus - 7

||Lumbosacral back support belt with dual tensioner system SIN Breathable fabric ||Characteristics Finger loop easy fitting Steel stays made with a special alloy very resitant Rigid elements combination Trunk orthosis with anterolateral closure for a proper fit. In the front area, it consists of semi-rigid vertical supports and a dense elastic foam fabric for a snug fit to the morphology of the abdomen. In the back area, it features steel supports with a special alloy that is tougher and more resistant, and a firmer, less elastic, fabric that helps to shape the figure while supporting the...

カタログの7ページ目を開く
One plus - 8

||Abdominal band Breathable fabric Steel stays made with a special alloy very resitant Rigid elements combination Trunk orthosis with anterolateral closure for a proper fit. Its breathable and unidirectional stretch fabric helps the trunk extensor moment while compressing the abdominal area. It features rigid front and side supports that control the most flaccid soft tissue and, at the back, it has posterior supports made from steel with a special alloy that is tougher and more resistant. Lumbar containment and support. Lower back pain. Improved posture. Containment of small and medium...

カタログの8ページ目を開く
One plus - 9

||Girdle trousers with lumbar support Pantbrace® Ref.: PF010 Breathable fabric ||Characteristics Made from highly elastic fabric, they feature a dual closure system at the front with zip and hooks, which, together with the stays, provide perfect control of the abdominal wall. The back section is reinforced by stays and features a lumbosacral compression pad on its inside. Externally, the lumbosacral region is embraced by a lumbar/elastic support which acts as a brace. Its regulation system enables controlled compression to be exerted in order to reduce hyperlordosis, realign the...

カタログの9ページ目を開く
One plus - 10

LOWER LIMBS ||Wraparound knee support with biaxial joints and metal supports SIN Breathable fabric ||Characteristics Silicone bubble grip Polycentric joints Rigid elements combination Knee support with back closure made from three-layer breathable elastic material. It can adapt to the different stages of recovery, and options include free toothed polycentric joints made from aluminium with a special alloy that is tougher and more resistant to high mechanical impacts (high support for the joint) or lateral spiral stabilisers (moderate support for the joint). It features 4 straps to enable...

カタログの10ページ目を開く
One plus - 11

||Wraparound knee support featuring joints with flexion/extension control SIN Breathable fabric ||Characteristics Silicone bubble grip Joint with flexion-extension control Rigid elements combination Knee support with front closure made from three-layer breathable elastic material featuring a rigid joint with flexion/extension movement range control. It features two straps to enable compression to be adjusted and the effectiveness of the joints to be increased. Its design can adapt to morphologies in which an exaggerated perimeter discrepancy exists between the lower thigh and upper calf....

カタログの11ページ目を開く
One plus - 12

||Post-surgical wraparound knee support with monocentric joints SIN Joint with flexion-extension control ||Characteristics Rigid elements combination Knee support with monocentric joint consisting of four trimmable foam and velour straps (two for the thigh and two for the calf). It is supplied with a foam fabric that allows full adaptability to the limb and can be trimmed to take into account the specific morphology of the patient. The mediolateral supports perform a fastening function and are height adjustable to ensure a comfortable fit. The joint can be locked at 0°, 15°, 30° or 45° of...

カタログの12ページ目を開く
One plus - 13

||Multifunctional ankle stabiliser SIN Breathable fabric ||Characteristics Strap corrector Rigid elements combination Ankle support made from three-layer breathable elastic material, featuring 2 high-density thermoplastic mediolateral splints and a rigid corrective textile strap. It can adapt to the different stages of recovery and have, to varying degrees, a protective, corrective and stabilising effect depending on the components used. Its design can adapt to morphologies in which an exaggerated perimeter discrepancy exists between the ankle area and the lower third of the leg. The outer...

カタログの13ページ目を開く

Orlimanのすべてのカタログと技術パンフレット

  1. ORTHOPEDIC PRODUCTS

    210 ページ

  2. SH-T210

    10 ページ

  3. 3-TEX

    16 ページ

  4. Orliven

    6 ページ

  5. FeetPAD

    20 ページ

  6. PEDIATRIC

    32 ページ

  7. SPORT

    7 ページ

  8. Sitlive

    36 ページ

  9. MATERNITY

    21 ページ

  10. Dorsotech®

    12 ページ

  11. FIXQUICK

    8 ページ

  12. Boxia® Plus

    8 ページ

  13. TheraGo

    28 ページ

  14. NEOPRENE SUPPORTS

    52 ページ

  15. 3-Tex®

    1 ページ