Ortholox UHMWPE Sternum Closure Surgical Technique
1 / 10ページ

Ortholox UHMWPE Sternal Cerclage Band System Fast and Stable Sternum Closure System

Specifications: Ortholox® UHMWPE Sternal Cerclage Band System Surgical Technique: Ortholox® UHMWPE Sternal Cerclage Band System Examples of Sternotomy Closure Ordering Info: Implants Ordering Info: Instruments

Specifications 5mm x 450mm UHMWPE woven polymer cerclage band Ti6AI4V ELI Titanium Alloy pre-assembled locking block Removable stainless-steel needle allows rapid and precise band insertion Strong and stable internal fixation without any need for bone drilling Wide band reduces contact stress and protects periosteal blood supply Minimal metallic contact with bone reduces any potential corrosion Low profile design facilitates improved post-operative patient comfort Flexible band allows limited dynamization for enhanced tissue healing Minimally invasive operative technique reduces surgery...

Surgical Technique When the Ortholox UHMWPE Sternal Cerclage Band is removed from the sterile package, it may be full width at the needle-band junction. (Picture on the left) Before starting the application, a sterile staff should round this part of the band by fingers as shown in the picture on the right. This will help the band to follow the hole of the needle if the needle is passed through the bone instead of intercostal approach and minimise the risk of getting stuck in the bone. Push the Stainless Steel needle attached to the Ortholox UHMWPE Sternal Cerclage Band through the...

Surgical Technique Hold the Ortholox Torque Handle Compatible Cerclage Band Tensioner with the ratchet wheel on the right-hand side. Pass the end of the band through the narrow slot at the tip of the shaft (below the bar) towards the handle. Locate the twin prongs at the tip of the Tensioner shaft on either side of the locking block so that it is held firmly in place on the cortical bone. Pull the end of the band without twisting, towards the T-part of the Tensioner. Ortholox Cerclage Band Tensioner- Short Ortholox Cerclage Band Tensioner- Short Insert the end of the band into the slot on...

Surgical Technique Make sure that end of the band remained in between the bands and rotating barrel. Ensure that the twin prongs at the tip of the Tensioner are still firmly positioned on either side of the locking block. Rotate the Ratchet Wheel in a clockwise direction until the band cannot be tightened any further. Instruments 12-501-000 Ortholox Cerclage Band Tensioner- Short Ortholox Cerclage Band Tensioner- Short Insert the tip of the Ortholox T-Torque Handle - 4.0Nm into the square hole located at the centre of the ratchet wheel. Firmly turn the T-Torque Handle clockwise until a...

Surgical Technique Once the locking screw is secured, release the tension on the remaining part of the band by pressing the release trigger on the Cerclage Band Tensioner. Then, re-check the tension on each of the cerclage bands as tension may be lost as each subsequent band is applied due to minor shifts of the fragments. If necessary, repeat all steps from Step 5 after loosening the set screw for any band that lost its tension. The procedures should be repeated for the application of additional bands, if needed. Attention: If multiple bands are to be applied, the excess lengths of band...

Ortholox UHMWPE Sternal Cerclage Band System Ordering Info Implants Back end of needle: Needle tip: Ortholox UHMWPE Sternal Cerclage Band System (Ti. Locking- w/Sharp Needle) - 5.0 x 450mm Ortholox UHMWPE Sternal Cerclage Band System (Ti. Locking- w/Sharp Needle) - 5.0 x 500mm Back end of needle: Needle tip: Ortholox UHMWPE Sternal Cerclage Band System (Ti. Locking- w/Blunt Needle) - 5.0 x 450mm Ortholox UHMWPE Sternal Cerclage Band System (Ti. Locking- w/Blunt Needle) - 5.0 x 500mm Back end of needle: Needle tip: Ortholox UHMWPE Sternal Cerclage Band System (Ti. Locking- w/Sharp Needle) -...

Ortholox UHMWPE Sternal Cerclage Band System Ordering Info Ortholox Cerclage Band Tensioner (Torque Handle Compatible) - Short Ortholox Straight Torque Handle - 4.0Nm Ortholox T-Torque Handle - 4.0Nm Ortholox Screwdriver - Short Ortholox Sternum Closure Instruments Container (Empty) Ortholox Sternum Closure Instruments Lid Ortholox Sternum Cerclage Band System Instrument Set - Complete

Ivedik OSB Mh. 1551. Cad. No: 35 Ic Kapi No:33 Yenimahalle – Ankara / Turkiye Tel : +90(312) 472 52 42 - Fax : +90(312) 397 43 15 www.ortolog.com info@ortolog.com Ortolog Medikal Sanayi ve Ticaret A.S. Ortholox UHMWPE Sternal Cerclage Band System