カタログ >
Shimadzu >
MOC-120H

MOC-120H
1 / 4ページ

カタログの抜粋

Electronic Moisture Balance

MOC-120H Accurate moisture measurement with new weight sensor Large sample pan allows even a large amount of sample to be placed evenly in a thin layer. The result is accurate and fast measurements. Mid-wave infrared quartz heater provides effective drying without interference for a wide range of samples. Besides the excellent drying performance, it offers a long operational life of 20,000 to 30,000 hours. Digital control allows a selection of measurement modes. 10 sets of measurement settings can be stored for quick recall. Select one of the 9 combinations of drying and halting modes to...

カタログの2ページ目を開く

Different forms of samples can be measured. Various materials can be measured. Ending modes • Automatic ending mode Automatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage. Alternate drying modes • Rapid drying mode First dries with the highest temperature for the specified period, then shifts to the specified temperature shortening measurement time. •Slow drying mode Gently heats samples that might solidify at the surface or samples that reduce under high temperature. •Step drying mode Allows step by step change of...

カタログの3ページ目を開く

"■ Peripherals, Accessories Electronic Printer (w/o AC adapter) AC Adapter for Electronic Printer 120 V AC Adapter for Electronic Printer 230 V GLP/GMP/ISO conforming calibration report can be produced Intermediate status and final results of measurements can be printed out graphically. (Includes connection cable, printer paper 1 roll. AC Adapter should be separately ordered.) Temperature Calibration Kit For temperature calibration at sample position, with calibration report. RS-232C cable For connecting with computer. Data can be sent without software (WindowsDirect). Printer paper for...

カタログの4ページ目を開く