DISS
1 / 2ページ

カタログの抜粋

DISS SMP DISS gas outlets are for use with medical gas systems. The gas outlets completely comply with NFPA99 and CGA regulations and pass testing of leakage and connector stability. The entire medical gas outlet includes rough-in and finished assembly. The Medical gas outlet shall be gas specific for the services indicated and accept only corresponding DISS-Type quick connect adapter. Gas specific indexed to eliminate interchangeability of gas services. The gas outlet is offered in Console type and Wall type. Wall Type Gas Outlet The wall type gas outlet includes finished and roughin assembly. The finished assembly shall have a gas specific index corresponding to the gas service on the rough-in assembly which prevents interchanging of the gas service. Each finished assembly shall be color coded for its specified gas service and be molded and shaped with silver and processed with sand blasting and painting. The finished assembly is intended for the level connection of the medical gas wall-outlets and filling up neighbor space. Rough-in assembly is available in size 3/8” & 1/2”of K type copper piping and the pipe has a 360˚ swivel for easy installation. Complies with NFPA 99 & CGA Color coded according to USA color 360˚ swivel inlet pipe for easy installation 100% individually pressure and leak tested Full range of mounting options Available in wall type and console type Gas specific adapters Optional trim plate to add an aesthetically pleasing finish to any wall outlet Console Type Gas Outlet The console type gas outlet includes finished and rough-in assembly. The finished assembly shall have a gas specific index corresponding to the gas service on the rough-in assembly which prevents interchanging of the gas service. Each finished assembly shall be color coded for its’ specified gas service and be molded and shaped with silver and processed with sand blasting and painting. The finished assembly is intended for the level connection of the medical gas wall-outlets and filling up neighbor space. Rough-in assembly is available in size 3/8” & 1/2”of K type copper piping and the pipe has a 360˚ swivel for easy installation. Solutions Start Here

カタログの1ページ目を開く

DISS Quick Adapters • The gas adapters are used to connect medical gas devices to medical gas terminals DISS adapters are following CGA standard Suitable for DISS gas outlet only Available in Handtight or Hex-nut Outlet Standard (OHM = OHMEDA) (JIS = JAPANESE STANDARD) (DIN = GERMAN STANDARD) (HTM = BRITISH STANDARD) (DIS = DISS STANDARD) (CHM = CHEMETRON STANDARD) (NIT = NITROGEN) (AR8 = AIR 800) (N28 = NITROGEN 800) (ETX = ENTONOX) (WAG = WASTE ANESTHETIC GAS) Example DIS - WAL - U - OXY - CS Outlet Standard: DISS Standard Type: Wall Type Standard: US Standard Gas: Oxygen Assembly:...

カタログの2ページ目を開く