Catalogue - Water manometer JTM
1 / 10ページ

WATER MANOMETERS

WATER MANOMETERS RAIL MOUNTING SYSTEMS AFNOR rail mounting system BS rail mounting system DIN rail mounting systems OHMEDA rail mounting systems NORDIC rail mounting system UNI rail mounting system Other standards available upon request.

WATER MANOMETERS DIRECT PROBES AFNOR direct probe OHMEDA direct probes NORDIC direct probe UNI direct probe Other standards available upon request.

JTM WATER MANOMETER The water manometer is used to measure and to adjust a low vacuum level (situated between the atmospheric pressure and 90 mbar). It is mainly used in the context of thoracic or tracheal suction but also in neonatalogy. The water manometer should be connected to a vacuum source on the wall either using a direct probe or a rail mounting system. It should be associated with a collection jar (equipped with a long plunger tube) and a suction hose. Main technical features: Active medical device of class IIa. • Available connections to the wall outlet: Direct probe or Rail...

J01 Single and Twin water manometers, 60 cm. J02 2 L collection jar with moulded hanger, polysulfone, with screw-fit metal lid and long plunger tube. Ref. 15055 WATER MANOMETERS

WATER MANOMETERS HOW DOES THE JTM WATER MANOMETER WORK? Working mode of the single water manometer • The JTM barometric water manometer essentially consists of a water tube in which the submerged height of a plunger tube can be adjusted (see drawing). • The water tube is connected to the primary suction in point “A” (high vacuum source), while the outlet in point “B” is blocked to simulate a suction in closed circuit, the plunger tube being submerged till height in point “H“ (as defined by the medical staff) and its upper side remaining out in the open. • When opening the regulation knob...

Please contact us for other configurations.

WATER MANOMETERS Mounted with DIN complete rail mounting system (polycarbonate clamp) Mounted with DIN direct probe US OHMEDA American Standard WATER MANOMETERS Mounted with US OHMEDA direct probe Mounted with US OHMEDA complete rail mounting system (polycarbonate clamp) – Available upon request only. Please contact us for other configurations. WATER MANOMETERS

WATER MANOMETERS NORDIC Scandinavian Standard WATER MANOMETERS Inlet thread: 1/8NPT F Inlet thread: 1/4G M Mounted with NORDIC direct probe Mounted with NORDIC complete rail mounting system (polycarbonate clamp) Please contact us for other configurations. Complete regulation knob Complete head for single JTM Complete head for twin JTM 100 cm complete body BOTTOM JTM bottom only Inlet adaptor 12x100 F Limiter head only for twin JTM Complete JTM bottom with gasket Suction tubing nipple 1/8G M Limiter body only for twin JTM Limiter stem only for twin JTM

SUCTION WATER MANOMETERS 11/2010 • Coordination : Serge Itzkowitch • Création : VBC Concept • Photographies : Fréderic Marigaux Also available