Extruder and Spheronizer
1 / 6ページ

TECHNICAL SPECIFICATIONS Video Link Add: VJ Instruments, 166/1, Deoda Sadan, Main Road, Karanja (Lad) – 444105 Dist: Washim. (MS). Office: +91 7256-224200 M- 91 9423128314 | Email: enquiry@vjinstruments.com, vivek@vjinstruments.co

Extruder is widely used for making pellets of different sizes starting from minimum 400 microns to maximum 2000 microns. Extruder gives mild compaction and is ideal for most of the Pharmaceutical formulation related to pelletization The function of a spheronizer is to convert extrudes into spheroids. Spheronization is the necessary second step of granulation by extrusion – spheronization process where pharmaceutical products are made into small spheres or spheroids Activate the machine and load the Pre-formulated wet mass into the feed funnel(Hopper). The material is forced through the...

Application- Spheronizer • The function of a spheronizer is to convert extrudes into spheroids. Spheronization is the necessary second step of granulation by extrusion – spheronization process where pharmaceutical products are made into small spheres or spheroids. • Spheronizer consists of a plate, which is having a special cross-hatched groves, known as chequered plate. This plate rotates inside a cylindrical bowl. • The radial clearance between the plate and the bowl is kept minimal (<0.3 mm) to reduce the powder leakage. • Purging air is supplied in this gap to prevent the falling of...

www.vjinstruments.com Technical Specification - Extruder Single Screw Production Capacity 2-6 kg/hr depends on formulation. Perforated mesh hole diameter Ø 1 mm standard. Optional with addition CostØ 0.5 mm Ø 0.6 mm Ø 0.8 mm Ø 1.2 mm Ø 1.5 mm Any Aqua base or solvent base formulation. Hopper Discharge Auto discharge by gravity Electric Accessories Standard Make (Bearing shaft seal of SKF etc or equivalent) Non Contact Area Matt Finish Contact area Matt Finish Machine part- Machine Finish Drive Motor User Manual, Warranty Certificate. Electric Consumption Add: VJ Instruments, 166/1, Deoda...

Technical Specification - Spheronizer Sr. No. Chequered Plater 3.2 mm Pitch Optional with extra cost. 2.0 mm Pitch 6.4 mm Pitch Production Capacity 40 to 500 gm per batch (2-6 kg/hr depends on formulation.) Any Aqua base or solvent base formulation. Electric Accessories Air purged inlet (Optional) Filter Air with min 2 Bar Pressure supply should be provided by Client. Standard Make (Bearing shaft seal of SKF etc or equivalent) Non Contact Area Matt Finish Contact area Matt Finish Machine part- Machine Finish Drive Motor Switch Gear User Manual & Warranty Certificate Electric Consumption...

Note 1. All the images displayed in the offer are for representation purpose only but actual may vary. 2. Dimension & weight may vary Add: VJ Instruments, 166/1, Deoda Sadan, Main Road, Karanja (Lad) – 444105 Dist: Washim. (MS). Office: +91 7256-224200 M- 91 9423128314 | Email: enquiry@vjinstruments.com, vivek@vjinstruments.co