カタログの抜粋
Rapid Mixer Gruanulator - Lab Model TECHNICAL SPECIFICATIONS Video Link Add: VJ Instruments, 166/1, Deoda Sadan, Main Road, Karanja (Lad) – 444105 Dist: Washim. (MS). Office: +91 7256-224220 M- 91 9423128314 | Email: enquiry@vjinstruments.com, vivek@vjinstruments.co
カタログの1ページ目を開く(A) General Structure & Mountings:Mounting frame is made out of mild steel & SS304 and M.S. parts cladded or covered with SS304, in which drive assembly is mounted at the bottom. This frame is covered with SS304 sheet. Mixing bowl is mounted at the top of this frame. Mounting platform is covered with SS304 covers from all sides. Staircase & railings are not required in 10 Lit. Lab Model. (B) Mixing Container:Mixing container (bowl), in which contact parts are made out of SS316 quality material. It comprises a flat base with a lower vertical cylindrical wall section and an upper conical...
カタログの2ページ目を開く(D) CONTROL PANEL AND PNEUMATIC SYSTEM: The operating panel will be mounted on platform and is provided with following controls, in electrically controlled panel. • Three/Single phase indicating lights. • Variable speed of Impeller motor & Slow & Fast speed of Chopper motor. • Pneumatic/Manual controls for the opening and closing of the discharge port. • Ammeters for both motors (Optional). • Main panel provided with pressure switch control for proper functioning of machine at desired air pressure. • The system Consist of moisture & Oil separator with regulator, pressure gauge, air...
カタログの3ページ目を開くwww.vjinstruments.com • All moving part of the machine are totally enclosed to eliminate accident. • The machine can-not be started unless and until the mixer cover is properly closed. • Flush wall type discharge valve eliminates pockets at the port of discharge valve. Pneumatically operated (non-rotating type) material discharge valve for 5Kg containers. • Castor wheel mounted mobile unit for easy handling (Optional). • Top cover with facility of light glass, sight glass and air filter . • Stainless steel air receiver. • Air filter for compressed air. • Granulator with U shape & knife edge...
カタログの4ページ目を開くValidation Documents Sr. Type NO. The URS will be provided by the buyer & must be Authorized by the client authority. All the relevant URS specifications, MOC, safety requirements shall be Featured in the URS The technical specifications of all major assemblies, Bought out items is specified in the DQ document. The various utilities such as voltage, power, steam, Design Qualification compressed air requirement shall be specified in this Documents. All the specifications mentioned in this document will be verified by the customer’s validation engineer All the major components and bought out...
カタログの5ページ目を開くVJ Instrumentsのすべてのカタログと技術パンフレット
-
Morris Water Maze
3 ページ
-
Mazes
6 ページ
-
Maze Master Software
7 ページ
-
Hot Melt Extruder
4 ページ
-
All Purpose Machine
3 ページ
-
FLUID BED DRYER
3 ページ
-
R&D COATER
4 ページ