external_hex_screw_removal_tools
1 / 8ページ

Recommended Guidelines Screw Removal Tool Kits for Certain® and External Hex ZimVie DE NTAL SOLUTIONS

Certain and External Hex Screw Removal Tool Kits Device Description ZimVie Dental Screw Removal Tool Kits facilitate the removal of a broken screw from the internal threads of Certain and External Hex Implants in the unlikely event of a screw fracture below the occlusal surface of the implant. Contents The Screw Removal Tool Kits contain: • (1) Drill Guide Handle • (1) Manual Reversing Drill • (1) Screw Removal Extraction Tool • (1) Waxing Screw/Guide Pin Ordering Information Certain Components Kit - ISRT10N Certain Drill Guide Handle Certain Screw Removal Extraction Tool Manual Reversing...

Certain Screw Removal Tools Directions for Use 1. Remove abutment and coronal end of broken screw from implant. Certain Implant Broken Screw [IUNIHG] 2. Align and insert the Certain Drill Guide Handle [ISRT05N] into the broken screw site. Seat the handle assembly fully on the platform of the implant with the hex aligned. Certain Drill Guide Handle [ISRT05N] Certain Implant Broken Screw [IUNIHG] 3. Insert the Manual Reversing Drill [USRT07] into the Certain Drill Guide Handle [ISRT05N]. Firmly seat the drill point(s) onto the surface of the broken screw inside the implant. Slowly (with...

Certain and External Hex Screw Removal Tool Kits 5. Insert the Certain Screw Removal Extraction Tool [ISRT06N] into the implant and seat the tool onto the top portion of the broken screw. Press onto the screw with moderate pressure to engage/capture the screw. Rotate the tool one to two revolutions in the reverse direction (counterclockwise). The screw should release from the implant internal threads. To help prevent accidental swallowing, thread floss through the floss hole of the extraction tool. 6. Remove the Certain Screw Removal Extraction Tool [ISRT06N] from the implant. The fractured...

External Hex Screw Removal Tools Directions for Use 1. Remove abutment and coronal end of broken screw from implant. 1 External Hex Implant Broken Screw [UNISG] 2. Align and insert the External Hex Drill Guide Handle [SRT05N] into the broken screw site. Seat the handle assembly fully on the platform of the implant with the hex aligned. External Hex Drill Guide Handle [SRT05N] External Hex Implant Broken Screw [UNISG] 3. Insert the Manual Reversing Drill [USRT07] into the External Hex Drill Guide Handle [SRT05N]. Firmly seat the drill point(s) onto the surface of the broken screw inside the...

5. Insert the External Hex Screw Removal Extraction Tool [SRT06N] into the implant and seat the tool onto the top portion of the broken screw. Press onto the screw with moderate pressure to engage/capture the screw. Rotate the tool one to two revolutions in the reverse direction (counterclockwise). The screw should release from the implant internal threads. To help prevent accidental swallowing, thread floss through the floss hole of the extraction tool. 6. Remove the External Hex Screw Removal Extraction Tool [SRT06N] from the implant. The fractured screw should remain captured in the...

For more information visit, ZimVie.com ZimVie 4555 Riverside Drive Palm Beach Gardens, FL 33410 1-800-342-5454 Phone: +1-561-776-6700 Fax: +1-561-776-1272 Unless otherwise indicated, as referenced herein, all trademarks and intellectual property rights are the property of ZimVie Inc. or an affiliate; and all products are manufactured by one or more of the dental subsidiaries of ZimVie Inc. (Biomet 3i, LLC, Zimmer Dental, Inc., etc.) and marketed and distributed by ZimVie Dental and its authorized marketing partners. For additional product information, please refer to the individual product...