BOWEL CARE & ENEMA TRAINER P16 USER INSTRUCTIONS

BOWEL CARE & ENEMA TRAINER P16 | Contents

BOWEL CARE & ENEMA TRAINER P16 PRODUCT INTRODUCTION The Bowel Care & Enema Trainer P16 can be used to demonstrate procedures of lower bowel dysfunction management, including Digital Rectal Examination (DRE), Stimulation (DRS) and Digital Removal of Faeces (DRF) as well as enema administration. This economical task trainer will help your team to be more competent and confident in their skills and knowledge of the clinical guidelines and procedures. The 3B Scientific® Bowel Care & Enema Trainer P16 allows the most important physiological scenarios to be presented realistically and cost-effectively....

BOWEL CARE & ENEMA TRAINER P16 FUNCTIONS The Bowel Care & Enema Trainer P16 allows a generalized representation of the buttock of a patient in pre-positioned left lateral recumbent as well as the relevant soft tissue structures to represent the anus. The upper buttock is soft and flexible to be more realistic; the trainee has to lift it to gain access to the anus. The different digital rectal inserts are made of 3B SKINlike™ sturdy silicone to simulate human skin and tissue haptic during DRE and DRS. The anus stays closed and remains watertight after the removal of the catheter due to the high...

BOWEL CARE & ENEMA TRAINER P16 ASSEMBLY Tip: Please follow this link to watch the „Installation Video P16“ on our website to see how easy the simulator can be set up. https://www.3bscientific.com/,p_153_31843.html DRF ASSEMBLY Parts required: 1. ecure the DRF insert into the buttock insert S 2. ill the DRF insert with solid stool preparation F to a maximum of 2/3 full 3. lace the hard stool in the solid stool P preparation 4. Close the DRF insert with the silicone cover 5. lace the red cover over the top of the P silicone cover 6. inally secure all DRF insert by connecting the F fixation box...

BOWEL CARE & ENEMA TRAINER P16 DRE / DRS ASSEMBLY Parts required: Installation: Use the DRF assembly steps, but: • Install the DRS insert instead of the DRF insert • Do not use hard stool (Bristol Stool Chart type I) in the DRS insert BOWEL CARE & ENEMA TRAINER P16 | Assembl

BOWEL CARE & ENEMA TRAINER P16 ENEMA ASSEMBLY Parts required: 1. Secure the Enema insert in the buttock part 2. or more realism in your training, F fill 2 measures of artificial soluble powder in the internal enema reservoir on which you already have installed the inner cap. Make sure the red dots of the inner cap and the reservoir are lined up. 3. ecure the reservoir in the S buttock insert. Make sure the red dots line up. 4. onnect the internal reservoir C port with the external extra reservoir by pushing the internal enema reservoir tube trough the secure fluid blue valve. è Note: Thanks to...

BOWEL CARE & ENEMA TRAINER P16 TECHNICAL DATA Weight: 3,8 kg Dimensions trainer: 55 × 35 × 32 cm Operating temperature: 0°C to +30°C (32°F to 86°F) Storage temperature: -10°C to +40°C (14°F to 104°F) ORDER LIST Replacements and Consumables Artificial Soluble Stool Powder (60g) Artificial Solid Stool Powder (1kg) Digital Rectal Inserts Replacements Set (3 time each digital rectal inserts) CONTACT INFORMATION A worldwide group of companies 3B Scientific GmbH Ludwig-Erhard-Straße 20 • 20459 Hamburg • Germany Phone: +  49   (0)40-73966-0 • Fax: +  49   (0)40-73966-100 3bscientific.com • [email protected]...