Product Manual - 3B Birthing Simulator Basic new - P90BN
16Pages

{{requestButtons}}

Catalog excerpts

Product Manual - 3B Birthing Simulator Basic new - P90BN - 1

P90 BASIC AND PRO VERSIONS OPERATING MANUAL

Open the catalog to page 1
Product Manual - 3B Birthing Simulator Basic new - P90BN - 3

3B Scientific Birth Simulator BASIC AND PRO VERSIONS You have acquired a birth simulator with basic features (Basic) or advanced features (Pro). It can be used to simulate the birth mechanics of normal positions, position anomalies and frequent complications, and C-sections. The simulated baby has a fontanel, shaped shoulder blades and an open mouth. The baby’s umbilical cord can be cut and reused up to five times. The placenta includes placenta residues that can be broken off and that leave adherent placenta in the birth simulator during the afterbirth. The anatomy of the 3B Scientific...

Open the catalog to page 3
Product Manual - 3B Birthing Simulator Basic new - P90BN - 4

FEATURES The Basic version allows a simplified, generalized representation and demonstration of the anatomy of the female pelvis and the various positions of the baby before and during birth. The realistic simulation of the Pro version, with its supplementary elements, also makes it suitable for realistic, practical exercises. These include for example a more realistic measurement of position in the Pro version through feeling the ischial spine, made possible by the realistic soft tissue simulation, or palpation of the birth position through the abdominal wall (e.g. Leopold's maneuvers)...

Open the catalog to page 4
Product Manual - 3B Birthing Simulator Basic new - P90BN - 5

3B Scientific Birth Simulator DELIVERY CONTENTS BASIC Modeled vulva with vagina (birth canal) Abdominal wall insert Abdominal wall insert Accessory set Amnion insert Safety strap Base body Abdominal wall Vulva Base body Base body Removable parts • Abdominal wall • Abdominal wall insert made of soft PVC • Planar cervix • Planar vulva with large opening Lubricant Accessory set (5 mm Allen key, 3 spare clips 15 clip holders) Baby Inflatable uterus insert Abdominal wall BABY (FOR PRO AND BASIC) Amniotic fluid additive Lubricant Umbilical cord Base body Removable parts • Abdominal wall •...

Open the catalog to page 5
Product Manual - 3B Birthing Simulator Basic new - P90BN - 6

3B Scientific Birth Simulator DELIVERY CONTENTS UPGRADE (FROM BASIC TO PRO) Removable parts • Abdominal wall • Two-layer abdominal wall insert made of cuttable silicone • nflatable uterus insert with cuttable and exchangeable upper I uterine wall • Anatomically shaped cervix • Modeled vulva with vagina (birth canal) • Safety strap • Amnion inserts 2 x lubricant 3 x amniotic fluid additive 2 x strap holder with screws Modeled vulva with vagina (birth canal) Abdominal wall insert Inflatable uterus insert Abdominal wall Safety strap Amniotic fluid additive Amnion insert Strap holders

Open the catalog to page 6
Product Manual - 3B Birthing Simulator Basic new - P90BN - 7

3B Scientific Birth Simulator ASSEMBLY AND UPGRADE OF THE BIRTH SIMULATOR Clip connections The vulva in the basic version and the abdominal wall insert (in both versions) are fastened to the abdominal wall using clip connections. Abdominal wall To enable free access to the inner soft tissue simulations, the birth simulator’s abdominal wall can be removed. This is a good idea if you want to give trainees a better insight into the birth mechanics at the beginning of demonstrations and exercises. To replace the vulva and cervix simulations in the Basic version with the Pro version, you will...

Open the catalog to page 7
Product Manual - 3B Birthing Simulator Basic new - P90BN - 8

3B Scientific Birth Simulator To better illustrate the intrauterine situation, it may be a good idea to remove the abdominal wall completely. In this case, please see the note below. Replacing the vulva (Basic version) The vulva is connected to the abdominal wall using six clip connections. Removing and inserting the abdominal wall start the installation of the abdominal wall with the Always lowest connection in the interior of the birth simulator (coccyx). As you proceed, this connecting pin becomes difficult to reach. • lace the birth simulator on a non-slip surface such as a table. P •...

Open the catalog to page 8
Product Manual - 3B Birthing Simulator Basic new - P90BN - 9

3B Scientific Birth Simulator Replacing the cervix (Basic and Pro versions) The cervix is fixed to the pelvic bone in the interior of the birth simulator with 10 knurled screws. The flexible silicone inserts can be pulled over the screw heads and removed without loosening the screws. • Pull the planar cervix down from the knurled screws. The uterus is introduced into the abdominal cavity from above. It can be pumped up to enable realistic palpation maneuvers. The uterus can be inserted into the abdominal cavity from the torso side of the birth simulator, where it can be secured using a...

Open the catalog to page 9
Product Manual - 3B Birthing Simulator Basic new - P90BN - 10

3B Scientific Birth Simulator Umbilical cord The umbilical cord is connected to the baby’s body with a screw connection. It can be cut and reconnected to the baby’s body up to five times, after which the umbilical cord is too short for the simulation of birth. Squeeze the blue and red strings into the screw connection using an Allen screw. • nscrew the Allen screw with the size 5 Allen key, which is U included in delivery. • o remove the umbilical cord from the baby’s body, turn the screw T (anticlockwise). • efore re-using the cut umbilical cord for further exercises, pull the B strings...

Open the catalog to page 10
Product Manual - 3B Birthing Simulator Basic new - P90BN - 11

3B Scientific Birth Simulator BIRTH SIMULATION Introduction The following pages are intended primarily for assistants who prepare and assist with demonstrations and exercises with the birth simulator. They outline the procedure during the different birth positions and a number of common complications that occur. To better illustrate the processes in the interior of the birth simulator, the abdominal wall has been omitted in some illustrations. Birth processes the simulation of the various types of birth, it is always For advisable to work in pairs. The assistant guides the baby from the...

Open the catalog to page 11
Product Manual - 3B Birthing Simulator Basic new - P90BN - 12

3B Scientific Birth Simulator Determining the position of the baby The birth simulator’s inflatable uterus allows a manual diagnosis to determine the position of the baby through the abdominal wall, for example using Leopold’s maneuvers. • Insert the uterus into the abdominal cavity from above. • Make sure that the locking pin on the uterus engages with the locking cylinder on the birth simulator. • Place the baby on the uterus in the required position. • Use the pump to start inflating the uterus until you can feel the baby’s body through the abdominal wall. • pply adequate amounts of...

Open the catalog to page 12

All 3B Scientific catalogs and technical brochures

  1. L50, L51, L55

    36 Pages

  2. Female Breast

    30 Pages

  3. C41

    16 Pages

  4. C18

    9 Pages

  5. G01

    24 Pages

  6. M10

    16 Pages

  7. A291

    20 Pages

  8. F11

    13 Pages

  9. P72

    48 Pages

  10. B60

    16 Pages

  11. A290 A291

    20 Pages

  12. G21, G22

    9 Pages

  13. K25

    12 Pages

  14. K20, K21

    12 Pages

  15. K17

    16 Pages

  16. D10

    12 Pages

  17. L56

    30 Pages