SAM4 - AUSCULTATION MANIKIN USER MANUAL

SAM4 – AUSCULTATION MANIKIN | Contents

SAM4 – AUSCULTATION MANIKIN INTRODUCTION Thank you for purchasing the Student Auscultation Manikin (SAM4), an interactive manikin for teaching students the art of auscultation. SAFETY PRECAUTIONS Attention: Read the manual and understand all warnings and cautions before using the manikin for the first time. Caution when using SAM4 Manikin: · Water Hazard: Avoid immersing any system connectors in fluids. SAM4 has no degree of protection against ingress of water. · Cleaning: Before cleaning, disconnect all cables and the AC power. Clean with a standard 70% Isopropyl Alcohol swab or wipe. Do not...

SAM4 – AUSCULTATION MANIKIN DELIVERY CONTENT · SAM4 Manikin · SAM4 Power Supply with interchangeable plugs SAM4 INSTALLATION SAM4 Installation and powering the system 1. Place the SAM4 manikin on a flat table or desk. 2. Connect the SAM power supply to the SAM4 and wall outlet. 3. Locate and press the SAM4 power (on/off) located on the left side of the base. The power switch will illuminate for some seconds alternating between green and red. After 40 seconds, a green light will blink every 5 seconds, indicating that the manikin is ready to connect to your smartphone or tablet. APPLICATION DOWNLOAD...

1 - Connecting the manikin to your device: ■ Via nearby devices: Click on this option and you will see a list of the manikins identified by the product Serial Number (the serial number can be seen on a label on the left side of the manikin's base). Click on the Manikin-Serial Number to connect and a pop-up will confirm the connection. Red lights will blink on the manikin as a visual confirmation as well. ■ Scan a QR Code: Select this option to connect to the manikin using your device's camera. Point the camera to the QR code printed on the base of the manikin. 2 - A pop-up will confirm the connection....

Sound settings 7 - Connect a Bluetooth device such as a speaker or earbuds. • Always select ‘Reset Paired Speakers' to unpair any device paired previously • Put your speaker or earbuds in pairing mode • Select ‘Enable Wireless Speaker' to connect to your device and wait for 30 seconds before selecting sound. 8 - Select the button on the right of Sound A or Sound B to pick one of the sounds in the library. 9 - The sounds are separated in 5 categories: Heart, Bruit, Combination, Breath and Bowel. The SAM4 Plus version contains additional features for some sounds, indicated by a colored dot on the...

12 - Pick an auscultation point on the virtual manikin and change the parameters related to the sound by clicking on the volume settings. On this representation, a dynamic sound (Available only for SAM4 Plus version) can have the Rate changed from 50 to 150BPM. For all sounds, additional adjustments in the volume are available to accentuate specific sounds, such as Aortic, Pulmonic, Tricuspid and Mitral. 13 - On this example, on Sound B is selected a ‘Normal Heart Sounds with Chronic Bronchitis' and both Heart and Lung sounds are present on 14 - Select one of the lung sounds to hear from front...

SAM4 – AUSCULTATION MANIKIN CLEANING The SAM4 manikin can be cleaned using a standard alcohol swab or wipe (70% Isopropyl Alcohol). Before cleaning unplug all cables including power from the manikin. Do not use excessive liquid or immerse any part of the SAM manikin. Doing so may result in moisture getting inside the unit. TRANSPORT AND STORAGE The SAM manikin can be safely stored or transported with the following environmental conditions: -20°C to 65°C (-4°F to 149°F), <95% relative humidity. OPERATING CONDITIONS Operating Temperature: 32°F to 104°F (0°C to 40°C) Humidity: 0 – 95% Relative Humidity...

^ A worldwide group of companies Webster • TX 77598 • USA Phone: +1-800-364-5901 [email protected]